Polycell 3-in-1 Basecoat - 5L - White - MPN 5190665
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to achieve a professional, long-lasting paint finish on interior walls. Polycell 3-in-1 Basecoat provides a crucial foundation by covering cracks, blocking stains, and obliterating strong colors, ultimately improving the final paint job. Keep in mind that proper surface preparation is key to optimal results. Adhering to the instructions will ensure the basecoat’s effectiveness.
All features
| Colour | White |
|---|---|
| Model Part Number | 5190665 |
| Brand | Polycell |
Extended Product Information
FAQs
How long does it take for the basecoat to dry?
Drying time is between 4 and 6 hours depending on the environmental conditions.
Can I use this basecoat on exterior surfaces?
No, this basecoat is designed for indoor use only.
How much area does a 5L container cover?
A 5L container covers between 26 and 40 square meters, depending on the surface porosity.
What tools do I need to apply this basecoat?
You will need a short pile roller (up to 5mm) or a brush, a roller tray, and appropriate cleaning materials.
How many coats of basecoat should I apply?
One coat is recommended.
Can I apply the topcoat immediately after the basecoat dries?
Yes, once the basecoat is fully dry (4-6 hours), you can apply the topcoat. Ensure you recoat within 4-6 hours.
How do I clean my tools after use?
Remove excess product from your tools and wash them with warm water.
Troubleshooting
Basecoat not covering stains effectively.
Ensure the surface was properly cleaned and prepared before application. Apply a second coat of basecoat and allow to dry completely.
Cracks reappearing after application.
Check that the basecoat was applied in accordance with instructions. Ensure the product has been applied according to the manufacturer's directions.
Paint not adhering well to the basecoat.
Ensure the basecoat is fully dry before applying the topcoat. Lightly sand the basecoat to improve adhesion if necessary.
Pros and Cons
Pros
- Provides a comprehensive solution by covering cracks, blocking stains, and obliterating strong colors.
- Offers excellent adhesion for subsequent paint coats, improving the overall durability of the finish.
- Suitable for a range of indoor surfaces, increasing its versatility.
- Reduces the need for multiple coats of topcoat paint by effectively preparing the surface.
- The quick drying time allows for faster project turnaround.
Cons
- Requires proper surface preparation, including cleaning and filling larger cracks with appropriate filler.
- Not suitable for outdoor use.
- Coverage rate varies, requiring careful calculation based on surface conditions.
- Optimal results depend on adherence to application instructions.
Setup, Compatibility & Care
- Surface Preparation:
- Ensure the surface is clean, dry, and free from loose particles and mold.
- Cover furniture and carpets to protect them from paint.
- Fill holes or cracks larger than hairline with an appropriate Polycell Polyfilla and sand down well.
- Application:
- Stir the product well before use.
- Transfer the basecoat to a roller tray for easier application.
- Apply with a short pile roller (up to 5mm) or brush evenly to the wall, avoiding overspreading.
- Apply one coat.
- Drying & Recoating:
- Allow to dry for 4-6 hours (depending on conditions).
- Recoat after a minimum of 4 hours and a maximum of 6 hours.
- Compatibility:
- Suitable for indoor plaster, plasterboard, and painted masonry surfaces.
- Care:
- Remove excess product from tools before washing with warm water.
- Do not use or store in extremes of temperature and protect from frost.