Smartseal Damp Proof Paint - Grey

Not Available Smartseal Damp Proof Paint - Grey

If you're encountering problems with moisture affecting the walls or ceilings in various sections ...

Currently unavailable

Colour

Black Blue Grey White Yellow

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners and contractors seeking a reliable solution to dampness issues. Smartseal Damp Proof Paint provides a robust, waterproof barrier, preventing water ingress on various surfaces and safeguarding against the recurrence of dampness. However, proper surface preparation is essential for optimal performance. This ready-to-use paint is designed for both internal and external applications, acting as a liquid DPM, a radon gas barrier, and is suitable for use in wet areas, cellars, and even ponds.

All features

Colour	Grey
Model Part Number	5061002785802
Brand	Smartseal

Extended Product Information

FAQs

How long does it take for the paint to dry?

The paint dries to the touch in approximately one hour, but allow sufficient time for full curing before exposing the surface to water.

Can I apply this paint over existing paint?

Yes, but ensure the existing paint is sound, clean, and properly prepared. Lightly sand the surface before application.

What surfaces can I use Smartseal Damp Proof Paint on?

The paint is suitable for concrete, brick, render, and other porous surfaces.

Is Smartseal Damp Proof Paint suitable for outdoor use?

Yes, it is suitable for both internal and external applications.

How many coats of paint are needed?

It is recommended to apply at least two coats for optimal protection. In some cases, more coats may be needed.

Can I plaster or tile over the paint?

Yes, once the paint is fully dry, you can plaster or tile over it.

Is the paint safe to use in a basement?

Yes, it is ideal for use in cellars and basements to prevent dampness and water ingress.

How much coverage can I expect from one can?

Coverage may vary depending on the surface porosity and application method. Refer to the product label for specific coverage details.

Troubleshooting

Paint is not adhering to the surface.

Ensure the surface is properly prepared, clean, and dry. Apply a primer if necessary and follow the manufacturer's instructions.

Paint is peeling or flaking after drying.

This could be due to insufficient surface preparation. Remove the flaking paint, prepare the surface again, and reapply the damp proof paint.

Dampness is still present after application.

Ensure that the paint has been applied according to the instructions and that all areas have been thoroughly covered. Consider applying an additional coat or addressing underlying issues causing the dampness.

Bubbles appearing in the paint during application.

Apply the paint in thin, even coats, and avoid over-brushing or over-rolling. Ensure the surface is free of air pockets.

Pros and Cons

Pros

Easy to apply, saving time and effort.
Provides a long-lasting waterproof barrier.
Suitable for a wide range of applications, inside and outside the home.
Offers protection against radon and other harmful gases.
Flexible and durable, resisting cracking and damage.
Non-toxic formulation, safe for users and the environment.

Cons

Requires proper surface preparation for optimal adhesion.
May require multiple coats for complete protection in some situations.
Color options may be limited depending on the specific product variant.
Coverage may vary based on surface porosity and application method.
Not suitable for all types of surfaces without proper priming.
Performance depends on correct application and environmental conditions.

Setup, Compatibility & Care

Surface Preparation: Ensure the surface is clean, dry, and free from loose materials, dust, and any previous coatings. Remove any existing mold or mildew.
Application: Apply the paint using a brush, roller, or spray. Apply at least two coats, allowing the first coat to dry completely before applying the second.
Drying Time: The paint dries to the touch in approximately one hour. Allow sufficient time for complete curing, as specified on the product label, before exposing the surface to water or other elements.
Compatibility: Compatible with concrete, brickwork, render, and other porous surfaces. It can be over-painted, plastered, or boarded over once dry.
Care: Clean tools immediately after use with water. Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. For cleaning the painted surface, use mild soap and water.