The XFORT door adjustable roller catches are a substitute for standard mortice latches that require the use of door handles or door knobs to retract the latch bolt upon turning. Perfect for use on airing cupboard doors, these roller catches can also be used on built in wardrobe doors, fitted to the top rail of double doors or any other door for that matter that uses fixed push or pull handles. These roller catches can be adjusted, which is great when there a considerable gap between the door and the frame. The pristine Polished Chrome finish gives them an elegant touch and seamlessly complements other interior fixtures. FEATURES: These XFORT roller catches are designed for internal doors. The tension of the spring in the roller catch holds it in the metal keep, ensuring the door is held in the closed position. They have a Polished Chrome finish which nicely complements other interior décor. Please refer to the images for product dimensions. SIMPLE TO USE: The roller catch is very simple and easy to install. A pull handle or door knob is often used to pull open the door or push to close it. There is no need for operating handles. ADJUSTABLE: The roller latch can be adjusted by inserting a flat headed screwdriver into the slot in the nylon roller – pushing it in and turning it 180 degrees clockwise to recede or anti-clockwise to loosen the mechanism. WIDE APPLICATION: The adjustable mechanism allows for wider application, suitable for doors that require varying degrees of closing strength. They can also be used where there is a large gap between the door and the frame. FIXTURES AND FITTINGS: All relevant fixtures are supplied including the keep and the colour matching screws.