As Creation Wooden Slats Panelling - Dark Oak Black - 39109-3



Currently unavailable



Currently unavailable
This guide is for anyone looking to easily update their living space with a modern, sophisticated aesthetic. The As Creation Wooden Slats Panelling 3D Wallpaper offers a lifelike wood panel effect that adds depth and visual interest to any room, providing a striking transformation with relative ease. However, achieving the best results requires careful surface preparation and precise application to fully realize its impressive 3D appearance.
| Colour | Brown |
|---|---|
| Model Part Number | 39109-3 |
| Brand | As Creation |
You should use a high-quality `ready-mixed wallpaper paste` specifically formulated for `non-woven wallpapers`. These pastes are designed to be applied directly to the wall.
No, it is strongly recommended to remove all existing wallpaper before installation. Applying over old wallpaper can lead to poor adhesion, visible imperfections, and an uneven finish.
While the non-woven material is durable, this wallpaper is not specifically designed for high-humidity environments. If used in a bathroom or kitchen, ensure the area is well-ventilated to prevent moisture accumulation and potential peeling.
The wallpaper features a `straight match` pattern repeat (Info needed: specific repeat length). When cutting your strips, unroll the next piece and align it with the previously cut piece on a flat surface to ensure the pattern flows continuously before applying to the wall.
The wallpaper is `wipeable`. Use a soft, damp cloth to gently wipe away any marks or dust. Avoid using abrasive cleaners, harsh chemicals, or excessive scrubbing, as this can damage the texture and print.
This wallpaper is designed to be a finished decorative product with its inherent colour and 3D wood slat pattern. Painting over it is not recommended as it would diminish the realistic texture and intended visual effect.
To calculate the number of rolls, measure the perimeter of your room and the height of your walls. Consult a wallpaper calculator or your retailer, considering the pattern repeat to account for waste during matching. It's always advisable to purchase an extra roll to ensure colour consistency and for future repairs.
Smooth the wallpaper from the center outwards immediately after hanging using a wallpaper brush or smoother. For stubborn bubbles, gently lift a section and re-smooth, or carefully pierce with a fine needle and smooth out the trapped air.
Ensure strips are perfectly butted together during installation, not overlapped. If seams lift after drying, apply a small amount of `seam adhesive` with a fine brush underneath the seam and press firmly into place with a seam roller.
This often indicates improper wall preparation (dusty, greasy, or unprimed porous surfaces) or insufficient paste. Ensure walls are clean, dry, and primed. Apply a generous, even layer of quality non-woven wallpaper paste. For areas that won't stick, gently peel back and re-paste, or use a `border or seam adhesive`.
This non-woven wallpaper is designed for straightforward installation, but proper preparation is key for a flawless finish.