Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide helps homeowners and commercial space managers understand and effectively use the As Creation Wood Slat Effect Wallpaper in Grey. It offers a stylish wood slat aesthetic with practical benefits like enhanced durability for high-traffic areas and good moisture resistance. While offering a transformative visual, proper surface preparation and careful installation are key to achieving its full potential and ensuring longevity.
| Pattern | Striped |
|---|---|
| Colour | Grey |
| Model Part Number | 39109-5 |
| Brand | As Creation |
No, the As Creation Wood Slat Effect Wallpaper is typically a 'paste-the-wall' type. You will need to apply a suitable non-woven wallpaper adhesive directly to your wall before hanging the strips.
This wallpaper is designed with a specific wood slat effect and grey color. While technically possible to paint over, it is not recommended as it would cover the intended design and texture, potentially diminishing its aesthetic appeal. There is also no guarantee on paint adhesion or finish.
Measure the total perimeter of the room and the height of the walls. Each roll typically covers approximately 5.3 square meters (0.53m width x 10.05m length). Account for pattern repeat and wastage by adding about 10-15% extra to your calculation. It is always better to have an extra roll than to run short.
Yes, this wallpaper features 'Good Moisture Resistance,' making it suitable for well-ventilated bathrooms where it's not directly exposed to water spray. Ensure proper ventilation to manage humidity levels.
For non-woven wallpapers applied with the correct adhesive, removal is usually quite straightforward. It can often be dry-stripped from the wall in full sheets, leaving the wall surface intact without much damage. No steaming or chemical removers are typically required.
We recommend using a high-quality, ready-mixed adhesive specifically designed for non-woven wallpapers. Always follow the adhesive manufacturer's instructions for application and drying times.
Ensure proper surface preparation before hanging, including priming. When hanging, smooth out all air bubbles thoroughly with a wallpaper smoother, working from the center outwards. For existing bubbles, a small incision and adhesive injection can sometimes fix them.
During installation, ensure edges are firmly pressed together with a seam roller. If seams lift later, carefully apply a seam adhesive underneath the lifted edge and press down.
Always cut subsequent strips by aligning them with the previous one to ensure pattern continuity. Use a plumb line for the first strip to ensure a perfectly straight starting point, as subsequent strips rely on this.
Verify the wall surface is clean, dry, and smooth. Ensure you are using the correct type and amount of wallpaper adhesive for your specific product (e.g., 'paste-the-wall' for non-woven). Ensure the adhesive is not expired.
This wallpaper has enhanced fade resistance. However, extreme, prolonged direct sunlight exposure can affect any material. Consider using UV-filtering window treatments in highly sunlit areas to prolong its life.
This wallpaper is generally compatible with most standard interior wall surfaces, including plasterboard, skimmed plaster, and painted walls, provided they are properly prepared. It is best suited for dry, stable environments, although its moisture resistance makes it versatile.
Due to its good moisture resistance, this wallpaper is relatively easy to care for.
