Frenchic Smoke Signal Al Fresco - 250ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Al Fresco paint in Smoke Signal is for DIY enthusiasts and homeowners seeking a versatile, durable, and aesthetically pleasing paint for various indoor and outdoor projects. Its key benefit is its adaptability, offering a warm, smoky beige-taupe that complements many décors, while its caveat is that it requires two coats for optimal longevity, especially on high-traffic surfaces.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 55774544494976 |
| Brand | Frenchic |
Extended Product Information
FAQs
What is the coverage rate for Frenchic Smoke Signal Al Fresco paint?
A 750ml tin covers up to 12.5m² per coat, meaning approximately 6m² for two coats. A 250ml tin covers approximately 2m² for two coats.
Do I need to use a primer with this paint?
This paint is self-priming for many surfaces. However, for very porous surfaces or highly glossy finishes, using a dedicated primer can improve adhesion and results.
Is this paint suitable for bathroom tiles?
It can be used on ceramic wall tiles, but it is not recommended for very wet areas such as shower surrounds or bath surrounds.
Can I use this paint outdoors?
Yes, Frenchic Al Fresco paint is designed for both interior and exterior use and is weatherproof and hardwearing.
How long should I wait between coats?
Allow adequate drying time between coats, typically a few hours, depending on temperature and humidity. The paint should feel dry to the touch before the second coat is applied.
What is the finish of Frenchic Smoke Signal Al Fresco?
The paint has a matte finish.
Is this paint safe for children's toys?
Yes, it is EN71-3 certified, making it safe for use on children's toys.
How do I clean up paint spills or brushes?
As this is a water-based paint, clean brushes, rollers, and any spills with soap and water immediately after use.
Troubleshooting
Paint is too thick or stringy.
Stir the paint thoroughly. If still too thick, a very small amount of water (e.g., 10% by volume) can be added, but avoid over-thinning.
Poor adhesion or peeling.
Ensure the surface was properly cleaned and degreased before application. Glossy surfaces may need light sanding. For difficult surfaces, consider using a dedicated primer.
Uneven color or streaks.
Ensure the paint is thoroughly stirred before and during use. Apply paint evenly with consistent brush strokes. Allow adequate drying time between coats and ensure the second coat is applied evenly over the first.
Paint is not drying.
Check environmental conditions; avoid painting in very cold or humid temperatures. Ensure coats are not applied too thickly. Allow more time for drying, especially for the final coat.
Pros and Cons
Pros
- Extremely versatile for numerous surfaces and locations.
- Durable and weatherproof finish suitable for exterior use.
- Sophisticated matte finish in an adaptable neutral color.
- Reduced preparation time due to self-priming and self-sealing properties.
- Certified safe for use on children's toys.
- Easy water-based cleanup.
Cons
- Two coats are recommended for best results, increasing project time and paint usage.
- Not recommended for very wet areas like shower surrounds.
- Coverage estimates depend on surface porosity and application technique.
- Specific performance on laminate and highly glossy surfaces may require thorough preparation.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the surface is clean, dry, and free from grease or loose material. Lightly abrading glossy surfaces can improve adhesion. For porous surfaces like unsealed wood or concrete, a primer may still be beneficial.
- Application: Stir the paint thoroughly before use. Apply using a good quality brush or roller. Two thin coats are recommended for durability and coverage.
Compatibility:
- Suitable Surfaces: Furniture, woodwork, laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (avoiding very wet areas like showers/bath surrounds), kitchen cupboards, front doors, interior wood and concrete floors.
- Unsuitable Surfaces: Very wet areas.
Care:
- Cleaning: Clean brushes and equipment immediately after use with soap and water.
- Surface Maintenance: For painted surfaces, wipe clean with a damp cloth. Avoid abrasive cleaners.