Bathroom Under Sink Cabinet - Grey



Currently unavailable



Currently unavailable
This kleankin under sink cabinet in grey is designed for homeowners seeking to maximize bathroom storage in tight spaces. Its primary benefit is the efficient utilization of the often-wasted area beneath a sink, keeping daily essentials organized and accessible. A key consideration is that assembly is required. The cabinet features a two-tier shelf system, with an adjustable upper shelf, a U-shaped cutout for plumbing, an anti-tipping design for safety, an elevated base to protect from moisture, and soft-close hinges.
| Colour | Grey |
|---|---|
| Model Part Number | 834-619V80LG |
| Brand | Kleankin |
Please refer to the product's detailed specifications sheet or diagram for exact measurements. (Note: Specific dimensions were not provided in the product information.)
The upper shelf is designed to be adjustable to three positions, typically via shelf pins. It can likely be removed for cleaning or to accommodate taller items if needed.
The product information does not specify the material, but such cabinets are commonly made from engineered wood or particleboard with a laminate finish.
It is designed for typical U-trap configurations. For non-standard or complex plumbing setups, measure the cutout dimensions and compare them with your plumbing before purchasing.
The anti-tipping kit usually includes brackets and screws. Attach one bracket to the top or back of the cabinet and the other to a wall stud, then connect them with the provided strap or cable.
While designed for bathrooms, its storage function could be adapted for kitchens. However, its aesthetic and moisture resistance are optimized for bathroom environments.
Specific weight capacities are not provided. Distribute weight evenly and avoid overloading the shelves, especially the adjustable one.
Check that the hinges are correctly installed and aligned. Ensure no items inside are obstructing the door's path. Adjust hinge screws if necessary for proper alignment.
Ensure all screws and fasteners are tightened securely. Check that the cabinet is placed on a level surface. Verify that the U-shaped cutout is correctly seated around the pipes.
Minor adjustments to the cabinet's position might be needed. If significant misalignment occurs, ensure the correct side panel was used during assembly. This unit is designed for standard plumbing; very unusual pipe configurations may not be compatible.
Review the assembly instructions and ensure correct parts are used. If a part is damaged, contact customer support for a replacement. Avoid over-tightening screws.
Setup: Assembly is required. Ensure you have a Phillips head screwdriver and follow the included instruction manual carefully. Pay close attention to the orientation of panels and the installation of hinges and the U-shaped cutout. We recommend assembling the unit near its final placement.
Compatibility: This cabinet is designed to fit under most standard bathroom sinks. The U-shaped cutout measures approximately [Insert common dimensions if known, e.g., 8" W x 7" D] to accommodate typical plumbing. Ensure your sink's pedestal or vanity base allows for its placement. Check the overall dimensions against your available under-sink space.
Care: Clean the cabinet with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as they can damage the finish. Wipe up spills immediately to prevent moisture absorption. Periodically check that the anti-tipping hardware remains secure.