Ultenic U15 Cordless Vacuum Cleaner - Yellow


Currently unavailable


Currently unavailable
The Ultenic U15 is a high-performance cordless vacuum cleaner designed for homeowners who prioritize deep cleaning power and ease of use, particularly those dealing with pet hair and hard-to-see dust. Its primary benefit is the combination of a potent 60KPa suction motor and the GreenEye dust-detection technology, though users should be mindful that its powerful motor and large dust bin make it slightly bulkier than entry-level lightweight stick vacuums.
| Colour | Yellow |
|---|---|
| Series | U15 |
| Model Part Number | U15 |
| Brand | Ultenic |
No, the vacuum features a self-standing design, allowing it to stay upright on its own.
Yes, the 60KPa suction is powerful enough to pull dirt from deep within carpets, though you may need to adjust your movement speed.
Depending on usage, it is generally recommended to wash the filter monthly and replace it every 6-12 months for optimal performance.
A full charge typically takes approximately 4-5 hours.
Yes, the brush roll is designed to be gentle on hard surfaces while effectively picking up debris.
The vacuum operates at a noise level under 75dB, making it relatively quiet during standard operation.
Check the dust cup for blockages, empty it if full, and inspect the brush roll for tangles. Also, ensure the HEPA filter is clean and properly seated.
Ensure the floor brush head is correctly clicked into the telescopic tube for a proper electrical connection.
Verify that the charging adapter is fully plugged into the wall and that the battery contacts are free from debris.
Setting up the Ultenic U15 is straightforward; simply snap the telescopic tube into the main motor unit and attach the floor brush. The battery is pre-installed for immediate use, though it is recommended to charge it fully before the first run. For maintenance, ensure the dust cup is emptied once it reaches the 'Max' fill line. Regularly check the HEPA filter by rinsing it under cold water if suction power decreases, ensuring it is completely dry before reinstalling. The brush roll should also be periodically wiped down to remove any accumulated static-cling dust.