Guard Epx-2K 2Pack Epoxy Floor Paint - Gloss Black
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Guard Epx-2K 2Pack Epoxy Floor Paint is a heavy-duty protective coating designed for concrete and steel surfaces in demanding environments. It offers long-term water and chemical resistance, making it ideal for high-traffic areas like warehouses, factories, and public event spaces. A key benefit is its excellent gloss and color retention, ensuring a durable and aesthetically pleasing finish. However, note that the coating may chalk with exterior exposure, and substrate temperatures must be at least 3°C above the dew point during application.
All features
| Colour | Black |
|---|---|
| Model Part Number | Epx-2K |
| Brand | Guard |
Extended Product Information
FAQs
What surfaces can Guard Epx-2K be applied to?
It is ideal for concrete and steel surfaces, commonly used for floors and metal stairways in industrial and commercial settings.
How long does it take to dry?
Guard Epx-2K is a very fast-drying formula, but specific drying and recoat times depend on application thickness, temperature, and humidity. Always refer to the product's technical data sheet for precise times.
Can I use this for exterior applications?
While it offers weathering resistance, the product is noted to chalk on exterior exposure. It is best suited for protected exterior areas or situations where chalking is acceptable. For areas requiring long-term pristine exterior finish, alternative solutions might be necessary.
What is the most important factor for successful application?
The most critical factor is ensuring the substrate temperature is at least 3°C (5°F) above the dew point. This prevents condensation and ensures proper curing and adhesion.
How do I clean the coated surface?
Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could compromise the coating's integrity.
How many colors are available?
Guard Epx-2K is available in 190 colors, with an in-house tinting service offered for custom shades.
Is this a single-component or two-component product?
Guard Epx-2K is a two-pack (two-component) product, meaning the resin and hardener must be mixed together before application.
Troubleshooting
Coating is not hardening or curing properly
Ensure the two components were mixed in the correct ratio and thoroughly combined. Verify application temperatures are within the recommended range and that the substrate was dry.
Poor adhesion to the surface
Check that the surface was properly prepared, clean, and dry before application. Re-evaluate surface preparation methods; a lack of mechanical or chemical cleaning can lead to poor adhesion.
Bubbling or blistering during or after application
This can be caused by moisture trapped in the substrate or applying the coating too thickly. Ensure the substrate is well below the dew point and apply in thin, even coats.
Chalking on exterior exposed surfaces
This is an expected characteristic of the product with exterior exposure. For areas requiring consistent gloss in direct sunlight, consider a different product or a UV-resistant topcoat.
Pros and Cons
Pros
- Exceptional water and chemical resistance for industrial environments.
- Superior adhesion to a variety of surfaces.
- Fast drying time reduces project completion time.
- Maintains aesthetic appeal with excellent gloss and color retention.
- Available in a wide range of colours for customization.
Cons
- May chalk when exposed to exterior elements.
- Requires specific temperature conditions during application (substrate at least 3°C above dew point).
- Not suitable for all exterior applications without potential for chalking.
- Two-pack system requires precise mixing.
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are clean, dry, and free from contaminants like grease, oil, or existing coatings. For optimal adhesion, surfaces may require light abrasion or priming.
Application Conditions: Crucially, the substrate temperature must be at least 3°C (5°F) above the dew point to prevent moisture issues. Avoid application in direct sunlight or during periods of high humidity if exterior application is being considered.
Mixing: This is a two-pack system. Follow the manufacturer's instructions precisely for mixing the resin and hardener components. Ensure thorough mixing to achieve the correct chemical reaction and performance properties.
Application Methods: Can be applied using brushes, rollers, or spray equipment suitable for epoxy coatings. Apply evenly for consistent coverage.
Care: Clean spills promptly. Regular cleaning with mild detergents and water is recommended. Avoid harsh abrasive cleaners or solvents that could damage the coating.
Compatibility: Primarily designed for concrete and steel. Test on a small, inconspicuous area before full application if applying to other substrate types.