Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide introduces the Dulux Weathershield Exterior Doors & Windows Protector in Green Glade, a reliable water-based satinwood paint designed for refreshing exterior metal and wood surfaces. It offers durable protection and a beautiful finish, though proper surface preparation is crucial for optimal results.
| Colour | Green |
|---|---|
| Model Part Number | 5244793 |
| Brand | Dulux |
This paint is specifically formulated for exterior metal and wood surfaces, including doors and windows.
It is quick-drying, allowing you to recoat in approximately 6 hours under normal conditions.
For best results, especially on bare wood or metal, using an appropriate primer is recommended to enhance adhesion and durability.
A 2.5L can covers up to 18 m² on average, depending on the surface porosity and application method.
Yes, it is a water-based paint with minimal VOCs (Volatile Organic Compounds), making it a safer choice for your home and the environment.
As this is a water-based paint, you can clean your brushes and tools with water immediately after use.
This paint is designed and optimized for exterior use, offering 10-year weather protection. While it contains minimal VOCs, it is best suited for its intended outdoor application.
Ensure ambient temperature and humidity are within recommended ranges. Cooler temperatures or high humidity can significantly extend drying times. Apply thinner coats if possible.
Ensure the surface was properly prepared and smooth. Apply paint evenly and avoid overworking the brush. Ensure each coat is fully dry before applying the next. Thinner coats generally yield a smoother finish.
This often indicates insufficient surface preparation. Ensure surfaces are clean, dry, and free from loose material before painting. For metal or bare wood, use an appropriate primer as recommended.
Ensure the surface is properly prepared and smooth, as rough or porous surfaces can absorb more paint. Apply an appropriate primer to reduce absorption, especially on bare wood.
For optimal results, proper surface preparation is critical. Ensure surfaces are clean, dry, and free from dirt, grease, and loose or flaking material. Sand down any rough areas or previous coatings to create a smooth base. For bare wood or metal, apply an appropriate primer for enhanced adhesion and durability. New unpainted surfaces may require specific preparatory steps; always refer to product label instructions.
This paint is specifically designed for exterior metal and wood surfaces. Do not use on surfaces not recommended by the manufacturer. It is a water-based product, so ensure all tools are cleaned immediately after use with water.
