JLab Pop Party Portable Bluetooth Speaker - Pink
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JLab Pop Party speaker is designed for music lovers seeking a portable, fun, and versatile audio experience. Its key benefit is the ability to deliver bold sound with customizable RGB lighting and the unique capability to link up to 100 speakers via LabSync for a truly immersive party atmosphere. A potential caveat is that the full 8-hour battery life is reduced when RGB lights are active.
All features
| Colour | Pink |
|---|---|
| Series | Pop Party |
| Model Part Number | SBPOPRMUL123 |
| Brand | JLab |
Extended Product Information
FAQs
What is the battery life of the JLab Pop Party speaker?
The JLab Pop Party speaker offers over 8 hours of playback time. This is reduced to approximately 5 hours when the RGB lighting features are actively used.
How many speakers can I connect with LabSync?
You can connect up to 100 JLab Pop Party speakers simultaneously using the LabSync feature to synchronize sound and lighting.
Is the speaker waterproof?
The speaker has an IP55 rating, which means it is water-resistant and protected against splashes and light rain. It is not designed to be submerged in water.
Do I need the JLab app to use the speaker?
No, you can use the speaker for basic playback via Bluetooth without the app. However, the JLab app is required to customize EQ settings, control RGB lighting, and perform firmware updates.
Can I use two speakers for stereo sound?
Yes, you can use the LabSync Stereo Pairing feature through the JLab app to designate two speakers as left and right channels for an immersive stereo experience.
What is the RMS rated power of the speaker?
The JLab Pop Party speaker has an RMS rated power of 5 Watts.
Does it come with a charging adapter?
No, an AC adapter is not included. The speaker is charged via a USB Type-C port, and you will need to provide your own compatible charging cable and power source.
Troubleshooting
Speaker won't turn on
Ensure the speaker is charged. Connect it to a power source using a USB Type-C cable and allow it to charge for at least 30 minutes before attempting to power it on again. Check that the cable and power source are functioning correctly.
Cannot connect to Bluetooth
Make sure the speaker is powered on and within range of your device. Turn off Bluetooth on your device and then turn it back on. If already paired, try unpairing the speaker from your device's Bluetooth settings and then re-pair it. Ensure no other devices are actively connected to the speaker.
Audio cutting out or poor quality
Check the Bluetooth connection strength; move the speaker and your device closer together. Minimize interference from other wireless devices or physical obstructions. If using multiple speakers via LabSync, ensure all connections are stable and within range.
RGB lights not working or not customizable
Ensure you have the latest version of the JLab app installed. Check the app settings for lighting options. If the issue persists, try restarting the speaker and your connected device. A firmware update via the app may also resolve this.
LabSync not connecting multiple speakers
Verify that all speakers are JLab Pop Party models and are running the latest firmware via the JLab app. Ensure all speakers are powered on and within Bluetooth range of each other. Follow the specific LabSync pairing instructions within the JLab app carefully.
Pros and Cons
Pros
- Highly portable with multiple carrying and mounting options.
- Impressive multi-speaker synchronization with up to 100 units via LabSync.
- Customizable RGB lighting to match any atmosphere.
- IP55 water resistance for durability in various environments.
- Offers stereo pairing for an enhanced listening experience.
Cons
- Battery life is significantly reduced when RGB lights are in use.
- While loud, the 5W power output may not be sufficient for very large outdoor gatherings without multiple linked speakers.
- Requires the JLab app for advanced customization of sound and lights.
- AC adapter is not included, requiring a separate USB-C charging solution.
Setup, Compatibility & Care
Setup:
- Charge the Speaker: Connect a USB Type-C cable to the charging port and a compatible power source. The battery takes approximately 3 hours to fully recharge.
- Power On: Press and hold the power button until the LED indicator lights up.
- Enable Bluetooth: Ensure Bluetooth is enabled on your device (smartphone, tablet, laptop).
- Pair Device: Search for "JLab Pop Party" in your device's Bluetooth settings and select it to pair.
- JLab App (Optional): Download the JLab app from your device's app store to access EQ presets, customize RGB lighting, and manage firmware updates.
Compatibility:
- Bluetooth Version: Compatible with Bluetooth 5.3 and older versions for broad device support.
- Operating Systems: Works with iOS, Android, Windows, and macOS devices that support Bluetooth audio output.
- LabSync: Requires other JLab Pop Party speakers for multi-speaker synchronization and stereo pairing. Control via the JLab app.
Care:
- Cleaning: Wipe the exterior with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials. Ensure the charging port is dry before connecting a cable.
- Water Resistance: The IP55 rating means the speaker is protected against dust ingress and low-pressure water jets. Do not submerge the speaker in water.
- Storage: Store in a cool, dry place when not in use. Protect the speaker from extreme temperatures.