Dulux Trade Super Matt Emulsion Paint 10L - White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Dulux Trade Supermatt White 10L emulsion paint, a high-opacity, matt finish paint ideal for interior walls and ceilings. The primary benefit is its excellent coverage and suitability for new plaster, making it a great choice for new builds or renovations. However, keep in mind that while it offers great coverage, proper surface preparation is crucial for optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | 5091663 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
What surfaces can I use Dulux Trade Supermatt on?
Dulux Trade Supermatt is suitable for all interior wall and ceiling surfaces, particularly new plaster that is still drying.
How much area will 10L of Dulux Trade Supermatt cover?
On average, 10L of paint will cover up to 18 m² per litre, but this can vary depending on the surface texture and porosity.
How many coats of paint are needed?
The normal finishing process is two coats of Dulux Trade Supermatt.
What is the drying time?
The drying time is 4 hours, but recoat after a minimum of 2 hours and a maximum of 4 hours.
Can I use this paint in a kitchen or bathroom?
Yes, Dulux Trade Supermatt is suitable for use in kitchens and bathrooms, but ensure good ventilation.
How do I clean the application tools?
Clean brushes and rollers with water immediately after use. Remove as much paint as possible from the equipment before cleaning.
Is this paint environmentally friendly?
Yes, Dulux Trade Supermatt has a minimal VOC level, making it environmentally friendly.
How should I store leftover paint?
Store the paint in a cool, dry place, away from extreme temperatures and frost. Ensure the container is sealed properly.
Troubleshooting
Uneven finish or patchy appearance.
Ensure thorough stirring of the paint. Apply an even coat and avoid over-brushing or over-rolling. Make sure the surface is properly prepared.
Paint not covering well.
Ensure you are applying the paint to a properly prepared surface. Two coats are recommended for optimal coverage. Consider a third coat if the surface is particularly porous or the existing color is very dark.
Paint is dripping or running.
Apply the paint in thin, even coats, avoiding applying too much paint at once. Ensure your application tools are not overloaded. Check for any dust or debris on the surface.
Paint takes too long to dry.
Ensure proper ventilation in the room. Make sure the temperature and humidity are within the recommended range. Avoid applying thick coats.
Pros and Cons
Pros
- Excellent coverage, reducing the number of coats needed.
- Non-reflective matt finish is ideal for ceilings.
- Water-based formula for easy cleanup and low odor.
- Suitable for various interior surfaces, including new plaster.
- High opacity ensures a consistent color and finish.
Cons
- Requires proper surface preparation for best results.
- Not available in all colors, limited to the White color family.
- Drying time of 4 hours, which might require planning.
- Not suitable for outdoor use.
- May require more coats on heavily stained or previously painted surfaces.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles. Fill any holes or cracks and sand down uneven areas.
- Priming (If Needed): For new or bare surfaces, dilute the first coat of Dulux Trade Supermatt with up to 1 part water to 3 parts paint.
- Application: Stir the paint thoroughly before use. Apply two coats, allowing 2-4 hours drying time between coats.
- Tools: Use a brush, roller, or spray, depending on your preference and the surface area.
- Cleaning: Clean brushes and rollers with water immediately after use. Remove as much paint as possible from the equipment before cleaning.