Handle & Home Cabinet Handle - 96mm Antique Brass
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Handle & Home Cabinet Handle is designed for homeowners and DIY enthusiasts looking to add a touch of classic elegance to their kitchens, wardrobes, or furniture. Its standout benefit is the rich Antique Brass finish with reeded detailing, offering a premium aesthetic. A potential consideration is the specific 96mm hole center measurement, which requires precise fitting. Key features include a durable Antique Brass finish, distinctive reeded detailing, and included fixing screws.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | HH7121ABR |
| Brand | B&Q |
Extended Product Information
FAQs
What are the exact dimensions of this handle?
The handle has 96mm hole centers, a total length of 136mm, a width of 12mm, and a projection of 32mm.
What type of screws are included?
It includes 25mm M4 fixing bolts for installation.
Can this handle be used on exterior doors?
This handle is designed for interior use on kitchen cupboards, wardrobes, and furniture. Exterior use is not recommended due to potential environmental factors affecting the finish.
How do I clean the Antique Brass finish?
Clean with a soft, damp cloth. For tougher spots, use a very mild soap solution and dry immediately. Avoid abrasive cleaners.
Will this handle fit cabinets with different hole spacings?
No, this handle is specifically designed for cabinets and drawers with 96mm (3.78 inches) hole centers. You may need to drill new holes or find a handle with different spacing if your existing ones do not match.
What other sizes or styles are available in this range?
Handle & Home offers other sizes such as 160mm and 128mm in Antique Brass, as well as coordinating knobs.
Troubleshooting
Handle does not align with screw holes.
Verify that your cabinet or drawer has 96mm hole centers. This handle is specific to this measurement.
Screws are too short or too long.
The handle is supplied with 25mm M4 fixing bolts. If your material is significantly thicker or thinner, you may need to source alternative M4 bolts of the appropriate length.
Finish appears dull or discolored.
Clean gently with a soft, damp cloth and mild soap. Ensure the handle is dried completely. Avoid harsh cleaning agents.
Handle feels loose after installation.
Check that the fixing bolts are securely tightened from the inside. Ensure the bolts are threaded correctly into the handle.
Pros and Cons
Pros
- Enhances cabinet and furniture aesthetics with a premium finish.
- Durable construction ensures longevity.
- Easy to install with included hardware.
- Versatile for use on drawers, cupboards, and wardrobes.
- Classic design complements traditional and modern decor.
Cons
- Specific 96mm hole centers may not fit all existing hardware.
- Antique Brass finish may require specific cleaning to maintain its luster.
- Limited to a single size (96mm) in this specific model.
- Material may show wear over extended periods in very high-moisture environments.
Setup, Compatibility & Care
Setup:
- Ensure your existing cabinet or drawer has 96mm (approximately 3.78 inches) hole centers.
- Remove any existing hardware.
- Insert the provided M4 x 25mm fixing bolts from the inside of the door or drawer.
- Align the handle with the holes and screw it onto the bolts.
- Tighten securely, but avoid over-tightening to prevent damage.
Compatibility:
- Hole Centers: Primarily compatible with fixtures requiring 96mm hole centers.
- Material Thickness: Suitable for standard cabinet doors, drawer fronts, and furniture panels.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- For stubborn marks, use a mild soap solution and dry thoroughly.