Granocryl Smooth Masonry Paint - Soft Gold - 5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Granocryl Smooth Masonry Paint in Soft Gold is designed for homeowners and professionals seeking a durable and weather-resistant finish for exterior masonry surfaces. Its key benefit is providing excellent protection and a long-lasting, fresh appearance to walls. A potential caveat is that optimal application requires suitable weather conditions.
All features
| Colour | Gold |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can Granocryl Smooth Masonry Paint be used on?
It is suitable for exterior brickwork, concrete, roughcast, rendering, pebbledash, and other similar masonry surfaces.
How should I prepare the surface before painting?
The surface must be clean, dry, and free from loose paint, dirt, or efflorescence. Remove any mold or algae, and consider a primer for new or porous surfaces.
What are the ideal conditions for application?
Apply in dry conditions, avoiding extreme temperatures (ideally between 10-25°C) and direct sunlight during application and drying.
How many coats of paint are typically needed?
One coat may suffice for maintenance, but two coats are often recommended for best results, especially on new or uneven surfaces, to achieve full opacity and durability.
How do I clean my tools after use?
Clean brushes and equipment immediately after use with water.
Can this paint be used on interior surfaces?
This product is specifically formulated for exterior masonry. For interior surfaces, a different type of paint would be more appropriate.
What is the drying time for this paint?
The paint dries relatively quickly, but recoating times and full cure will depend on temperature and humidity. Always refer to the product's specific instructions for detailed drying times.
Troubleshooting
Paint not adhering well
Ensure the surface was properly prepared, clean, and dry before application. Consider using a masonry primer if the surface is very porous.
Uneven finish or streaking
Stir the paint thoroughly. Apply in consistent strokes, maintaining a wet edge to avoid lap marks. Ensure even application of coats.
Color appears different than expected
Color can vary based on surface texture, porosity, and lighting conditions. Ensure the paint was well-mixed. A second coat might achieve the intended color depth.
Paint peeling or blistering
This can occur if applied in damp conditions or at low temperatures. Ensure the surface was dry and the environmental conditions were suitable during application and drying.
Pros and Cons
Pros
- Provides excellent protection against weathering.
- Offers good covering power for an even finish.
- Enhances the aesthetic appeal of masonry.
- Suitable for a wide range of exterior masonry surfaces.
- Easy to apply and dries relatively quickly.
Cons
- Requires appropriate weather conditions for application and drying.
- Color may vary slightly depending on the surface and lighting.
- May require multiple coats for optimal coverage on heavily textured surfaces.
Setup, Compatibility & Care Instructions
Preparation: Ensure the masonry surface is clean, dry, and free from loose paint, dirt, or efflorescence. Remove any mold or algae with a suitable cleaner. For new or porous surfaces, a primer may be recommended.
Application: Stir the paint thoroughly before use. Apply with a brush or roller, working the paint into the surface. A second coat may be necessary for full opacity or a deeper color. Apply in dry conditions, avoiding extremes of temperature and direct sunlight during application and drying.
Compatibility: Suitable for exterior brickwork, concrete, roughcast, rendering, pebbledash, and other similar masonry surfaces.
Care: Clean tools and brushes immediately after use with water. For cleaning the painted surface, use a soft cloth and mild detergent if necessary. Avoid abrasive cleaners.