Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to achieve a durable, high-gloss finish on exterior wood surfaces using Sandtex Trade Flexigloss X-Tra. The key benefit is long-lasting protection against the elements, with enhanced resistance to cracking and flaking, ensuring your wood stays beautiful for up to 10 years. However, proper surface preparation and application are crucial for optimal results. This guide will provide information on key features, real-world use cases, setup, compatibility, care, and troubleshooting to help you get the most out of your Sandtex Flexigloss X-Tra.
| Colour | White |
|---|---|
| Model Part Number | 5041062 |
| Brand | Sandtex |
Coverage can vary depending on the surface and application method. Refer to the product label for specific coverage details.
Apply 2 coats for optimal coverage and durability.
Touch dry in 4-6 hours; ready for recoat in 16 hours.
This paint is specifically designed for exterior wood surfaces. It is not recommended for metal surfaces.
Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Sand the surface lightly to create a key for the paint to adhere to.
It provides a stunning high-gloss finish.
Clean tools immediately after use with a suitable solvent.
Ensure adequate ventilation and check the temperature and humidity levels. Ensure the surface is clean and free of contaminants.
Ensure proper surface preparation. Apply the paint in thin, even coats and allow sufficient drying time between coats.
Ensure the paint is thoroughly mixed before application. Apply an even coat and avoid over brushing.
Apply thinner coats and avoid applying too much paint at once.
