Johnstone's Trade Aqua Gloss - Black
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Johnstone's Trade Aqua Black Gloss paint on interior and exterior surfaces. The paint offers a high-gloss finish similar to traditional solvent-based paints, but with the added benefits of quick drying and low odor. Keep in mind that proper surface preparation is crucial for the best results.
All features
| Colour | Black |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can I use this paint on?
Johnstone's Trade Aqua Black Gloss is suitable for use on both interior and exterior wood and metal surfaces.
How many coats of paint are needed?
Two coats are generally recommended for optimal coverage and finish.
How do I prepare the surface before painting?
Clean the surface thoroughly, remove any loose paint or debris, and sand it lightly to create a key for the paint. Use a primer if needed.
What is the drying time?
Drying times can vary, but this paint is designed to dry quickly. Refer to the product label for specific drying times.
How do I clean my paintbrushes and rollers?
Clean tools immediately after use with water.
Can I use this paint on radiators?
Yes, Johnstone's Trade Aqua Black Gloss is suitable for use on metal surfaces, including radiators.
What kind of finish does this paint provide?
It provides a high-gloss finish.
Troubleshooting
Paint is not drying properly.
Ensure adequate ventilation and check the room temperature. Make sure the paint is not applied too thickly. Allow sufficient drying time between coats.
Paint appears streaky or uneven.
Ensure the paint is well-stirred. Apply the paint evenly, avoiding overbrushing or overrolling. Multiple thin coats usually produce a better finish than a single thick coat.
Paint is peeling or flaking.
Ensure the surface was properly prepared (cleaned and sanded). Make sure the surface is primed if needed. Remove loose paint, sand the area, and reapply the gloss paint.
Pros and Cons
Pros
- Low odor compared to traditional gloss paints.
- Quick drying time.
- Suitable for both interior and exterior use.
- Provides a high-gloss, professional finish.
- Easy to apply.
Cons
- Requires proper surface preparation for optimal results.
- May require multiple coats for full coverage, depending on the surface and existing color.
Setup, Compatibility & Care
Setup
- Surface Preparation: Thoroughly clean and prepare the surface. Remove any loose paint, dirt, grease, or rust. Sand the surface lightly to create a key for the paint.
- Priming (If Necessary): For bare wood or metal surfaces, apply a suitable primer before applying the gloss paint.
- Application: Stir the paint well before use. Apply the first coat evenly using a brush or roller. Allow it to dry completely before applying subsequent coats.
- Coats: Two coats are generally recommended for optimal coverage and finish.
Compatibility
- Compatible with most common primers designed for wood and metal surfaces.
- Ensure compatibility with any existing paint layers by testing in an inconspicuous area.
Care
- Clean tools immediately after use with water.
- Clean painted surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.