Mitcheldean Wallpaper Roll - Grey - Striped
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Fairmont Park Mitcheldean Wallpaper in Grey is designed for homeowners and DIY enthusiasts looking to add sophisticated, textured elegance to their living spaces. Its primary benefit is the combination of a tactile vertical texture with metallic-infused diagonal stripes that catch light, creating a dynamic visual focal point; however, users should be aware that the distressed stripe pattern requires careful alignment during installation to ensure a seamless look across the wall.
All features
| Pattern | Striped |
|---|---|
| Colour | Grey |
| Model Part Number | 54B8710CAC394EAAADC99BA0F02177AC |
| Brand | Fairmont Park |
Extended Product Information
FAQs
Is this wallpaper prepasted?
No, this wallpaper requires the application of wallpaper paste to the wall or the back of the paper depending on your installation method.
How many rolls do I need for a standard room?
Coverage depends on wall dimensions; divide your total wall surface area by 5 square meters per roll to get an estimate, but always add 10% for trimming and pattern matching.
Can this be installed in a bathroom?
It is generally not recommended for high-humidity areas or bathrooms unless the room has exceptional ventilation, as moisture can compromise the adhesive.
Is the wallpaper washable?
It can be gently wiped with a damp cloth to remove light dust, but it is not intended for heavy scrubbing or direct water exposure.
Does the pattern require a match?
Yes, the diagonal stripe design requires careful alignment. Refer to the manufacturer's label on the roll for the specific pattern repeat measurement.
What tools are required for installation?
You will need a sharp craft knife, a wallpaper smoothing tool, a plumb line, a seam roller, and a paste brush or roller.
Troubleshooting
Visible seams between wallpaper strips
Ensure the edges are firmly butted together during application and use a seam roller to flatten the joints while the paste is still wet.
Bubbles forming under the paper
Smooth out bubbles from the center of the strip toward the edges using a wallpaper smoothing tool; if stubborn, carefully prick with a pin to release trapped air.
Wallpaper peeling at the corners
Apply a small amount of seam adhesive or wallpaper paste behind the edge and press firmly against the wall until set.
Pros and Cons
Pros
- Adds sophisticated depth to flat walls
- Vertical texture helps mask minor wall irregularities
- Light-reflecting inks create a dynamic, changing appearance
- Neutral grey tone complements a wide range of furniture
Cons
- Requires careful pattern matching due to the diagonal design
- Requires professional-grade wallpaper paste not included in the roll
- Not recommended for high-humidity areas like bathrooms
Setup, Compatibility & Care
Before installation, ensure your wall surface is clean, dry, and primed with a suitable wallpaper primer to facilitate proper adhesion. Measure your wall height and width accurately, accounting for pattern repeats. Always use a high-quality adhesive recommended for non-woven or standard wallpaper types. When hanging, use a plumb line to ensure the vertical texture and diagonal stripes remain perfectly aligned. For maintenance, the surface can be gently wiped with a slightly damp, soft cloth to remove dust. Avoid using abrasive cleaners or scrubbing tools that could damage the metallic ink finish.