Elica Boxin LX Built In Extractor Hood - Silver - A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Elica Boxin LX 60cm Built In Extractor Hood. It helps you understand how to use and maintain your extractor hood to keep your kitchen fresh. While the hood offers efficient odour removal and LED lighting, it's important to note that performance depends on correct installation and regular filter maintenance.
All features
| Energy Efficiency | A |
|---|---|
| Colour | Silver |
| Model Part Number | PRF0114760 |
| Brand | Elica |
Extended Product Information
FAQs
How often should I clean the grease filter?
It is recommended to clean the grease filter every 1-2 months, depending on usage. More frequent cleaning is needed if you cook frequently or do a lot of frying.
How do I clean the grease filter?
Remove the grease filter and wash it with warm, soapy water. Rinse thoroughly and allow it to dry completely before replacing it.
How often should I replace the charcoal filter?
The charcoal filter should be replaced every 3-6 months, depending on usage. The Long Life filter option can last up to 3 years with proper washing and drying maintenance.
What kind of lighting does the extractor hood use?
The extractor hood uses LED lighting.
What is the maximum extraction capacity?
The maximum extraction capacity is 620 m3/h.
What is the energy efficiency class?
The energy efficiency class is A.
What is the diameter of the exhaust connection?
The exhaust connection diameter is 15 cm.
What should I do if the extractor hood isn't working properly?
First, check the power supply and connections. Then, consult the troubleshooting section of this guide or contact a qualified technician.
Troubleshooting
Extractor hood is not turning on.
Check the power connection and ensure the circuit breaker has not tripped. If the problem persists, consult a qualified technician.
Extractor hood is not removing odours effectively.
Check and clean or replace the grease filter and/or charcoal filter. Ensure the ducting is properly connected and not blocked.
LED lights are not working.
Check the bulb and replace if necessary. Ensure the power is disconnected before replacing the bulb.
Extractor hood is making excessive noise.
Check if the fan blades are obstructed. Ensure the unit is installed correctly and that the ducting is not causing the noise. If the noise continues, consult a technician.
Pros and Cons
Pros
- Efficient odour removal.
- Easy-to-use rotary dial controls.
- Integrated design for a seamless kitchen look.
- LED lighting for improved visibility.
- Energy-efficient operation.
- Washable filters for cost-effective maintenance.
Cons
- Requires professional installation for optimal performance.
- Filter maintenance is required for continued efficiency.
- Noise level might be noticeable at higher speeds.
- May require replacement filters depending on usage.
- Limited to ducted extraction.
Setup, Compatibility & Care
Setup
- Professional Installation: The extractor hood should be installed by a qualified professional to ensure correct operation and adherence to safety standards. Ensure the ducting is properly connected to the outside.
- Electrical Connection: Ensure the unit is connected to a suitable power supply.
- Positioning: The hood should be positioned at a minimum distance of 50cm from an electric hob and 50cm from a gas hob.
Compatibility
- Ducting: Compatible with standard 15cm exhaust connection ducts.
- Power: Requires a 180W connected load.
Care
- Cleaning: Clean the stainless steel surface with a soft cloth and a non-abrasive cleaner.
- Filter Maintenance: Regularly clean the grease filter. The Long Life filter option can last up to 3 years with proper washing and drying maintenance. Refer to the manual for specific cleaning instructions.
- Filter Replacement: Replace the charcoal filter when necessary to maintain odour removal efficiency. The frequency of replacement depends on usage.
- LED Bulbs: Replace LED bulbs with the correct specifications when needed. Ensure the unit is disconnected from the power supply before replacing bulbs.