Fine Decor Wild Meadow Wallpaper - Green

Currently unavailable

Currently unavailable
This guide is for homeowners looking to add a natural, vintage aesthetic to their living spaces with the Fine Decor Wild Meadow Wallpaper in Green. Its key benefit is a visually striking floral design that can transform a room, though it requires careful pattern matching for a seamless finish. This washable, strippable wallpaper features a smooth paper background and a vintage floral print available in several colorways, offering a beautiful way to redecorate.
| Colour | Green |
|---|---|
| Model Part Number | FD43337 |
| Brand | Fine Decor |
This method involves applying wallpaper paste directly to the wall surface instead of the wallpaper itself. The dry paper is then hung onto the pasted wall, which can make the process faster and cleaner.
Measure the width and height of your wall in meters. Multiply these two figures to get the square meterage. Always add a little extra for pattern matching and trimming.
A pattern repeat is the distance on the roll before the design starts to repeat. An offset match means that the pattern on the next strip will not align at the same height; it needs to be shifted by half the pattern repeat (26.5cm in this case) to match correctly.
While the wallpaper is washable, it is not designed for high-moisture environments like bathrooms. It's best suited for standard living areas where humidity is not a significant factor.
This wallpaper is strippable, meaning you should be able to peel it off the wall in large sections once you get a starting point, especially after soaking it with warm water and removing the top surface layer.
You will need wallpaper paste suitable for 'Paste The Wall' application, a pasting brush or roller, a sharp craft knife or trimmer, a smoothing brush or roller, a straight edge or spirit level, and a clean damp cloth.
Carefully lift the edge of the affected strip and smooth out the bubble towards the nearest edge using a wallpaper smoother. If paste has dried, you may need to re-paste the area.
Check that you are using the correct offset match (26.5cm for this pattern) and that strips are hung straight. Minor adjustments may be possible before the paste fully sets.
Ensure you are using a sharp craft knife or wallpaper trimmer. Make clean, decisive cuts.
Wipe away excess paste immediately with a damp cloth. Ensure seams are butted together neatly without excess paste squeezing out.
Setup: This wallpaper uses the 'Paste The Wall' application method. Prepare your walls by ensuring they are clean, dry, and free from old wallpaper or loose paint. Apply a suitable wallpaper paste directly to the wall, following the paste manufacturer's instructions. Hang the wallpaper strips, butting the edges together without overlapping. Use a wallpaper brush or smoother to press the paper firmly onto the pasted wall, working from the center outwards to eliminate air bubbles.
Compatibility: Suitable for application on most prepared interior walls and surfaces, provided they are smooth, dry, and properly primed. Not recommended for use in areas of high humidity or direct, prolonged contact with water, such as inside a shower.
Care: To clean, use a damp cloth to gently wipe away marks. Avoid using abrasive cleaners or excessive water, as this can damage the paper. Ensure the wallpaper is dry after cleaning.