Promaster Diver - Citizen - BN0150-28E

Currently unavailable

Currently unavailable
The Citizen Promaster Diver (BN0150-28E) is an ISO-compliant dive watch for recreational divers and outdoor enthusiasts who need a reliable, low-maintenance timepiece. Its key benefit is the Eco-Drive technology, which powers the watch using any light source, eliminating the need for battery changes. A potential caveat for some users might be the 42mm case size, which could be larger than preferred for those with smaller wrists.
| Material | Leather |
|---|---|
| Series | Promaster Diver |
| Model Part Number | BN0150-28E |
| Brand | Citizen |
No, the Citizen Promaster Diver BN0150-28E features Eco-Drive technology, which is powered by light. It converts any natural or artificial light into energy, eliminating the need for battery replacements.
ISO-compliant means the watch meets the international standard (ISO 6425) for dive watches, ensuring it has specific features and performance characteristics required for safe use underwater, such as water resistance, shock resistance, and magnetic resistance.
A fully charged Eco-Drive watch can run for several months (typically 4-6 months or more) in complete darkness. However, regular exposure to light is recommended to maintain optimal performance and longevity of the power cell.
Yes, this watch is rated for 200M water resistance and is ISO-compliant, making it suitable for scuba diving at depths that do not require helium escape valves.
After exposure to salt water or chlorine, rinse the watch with fresh water. Clean the case and strap using a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or seals.
The watch comes with a 5-year Citizen UK warranty, providing coverage against manufacturing defects.
Yes, the rubber strap can be replaced with a standard watch strap of the same lug width if desired, allowing for customization.
The Eco-Drive power reserve may be depleted. Expose the watch to a strong light source (preferably sunlight) for at least 8 hours to fully recharge the power cell. Ensure the watch is regularly exposed to light during normal wear.
Unscrew the crown by turning it counter-clockwise. Gently pull the crown out to the appropriate position (usually two clicks for time, one for date). Set the time and date, then push the crown back in and screw it down clockwise to ensure water resistance.
The screw-down crown may not be fully tightened, or the seals may be compromised. Ensure the crown is screwed down completely. If fogging persists or you suspect water ingress, do not operate the crown and seek professional service immediately to prevent internal damage.
Debris or salt build-up can make the bezel stiff. Rinse the watch thoroughly with fresh water, paying attention to the bezel area. Gently try to rotate the bezel while rinsing. If the issue persists, avoid forcing it and consult a service center.
Setup: The Promaster Diver BN0150-28E requires no complex setup. Its Eco-Drive technology means it is powered by light. Simply expose the watch to any light source (natural sunlight or artificial light) to charge it. A full charge can power the watch for several months in darkness. There are no batteries to change or electronic settings to configure initially, beyond setting the time and date.
Compatibility: This watch is compatible with standard watch strap replacements if you wish to change from the rubber strap. The movement itself is self-contained and does not require compatibility with external devices.
Care: