HP Sprocket 2x3 Instant Smartphone Photo Printer - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The HP Sprocket 2nd Edition Printer is designed for users who want to instantly print 2"x3" photos directly from their smartphones or social media. Its key benefit is the portable, wireless printing experience with creative customization options via the HP app. A potential caveat is the reliance on proprietary ZINK paper and app functionality for full features.
All features
| Colour | White |
|---|---|
| Series | Sprocket |
| Model Part Number | AMZNBHPISPW |
| Brand | HP |
Extended Product Information
FAQs
What size photos does the HP Sprocket print?
The HP Sprocket 2nd Edition prints 2 inches by 3 inches (5 x 7.6 cm) photographs.
Do I need ink cartridges for this printer?
No, the HP Sprocket uses ZINK (Zero Ink) technology. The special ZINK photo paper contains the color, which is activated by heat during the printing process, so no ink, toner, or cartridges are needed.
How many prints can I get from one charge?
You can get approximately 35 prints on a full charge.
Can multiple people print to the same HP Sprocket at once?
Yes, the HP Sprocket 2nd Edition allows multiple users to connect and print via Bluetooth. Friends can connect to the printer through the HP Sprocket app.
Is the ZINK paper sticky?
Yes, the HP ZINK photo paper has an adhesive backing. You can peel off the backing after printing to stick your photos onto surfaces.
What kind of paper should I use?
You must use HP ZINK photo paper specifically designed for the Sprocket series for optimal results and functionality.
How long does it take to print a photo?
Printing a single photo typically takes less than a minute after the connection is established and the photo is sent.
Troubleshooting
Printer not turning on
Ensure the printer is fully charged using the Micro USB cable. Try a different USB cable or power adapter if issues persist.
Photos not printing or printing blank
Check that the ZINK paper is loaded correctly with the blue Smart Sheet at the bottom. Ensure the paper tray is closed properly. Try re-inserting the ZINK paper. Run the print head cleaning utility in the app.
Bluetooth connection failed
Ensure Bluetooth is enabled on your smartphone. Restart both your smartphone and the HP Sprocket printer. Remove the previous pairing from your phone's Bluetooth settings and try pairing again through the HP Sprocket app.
Poor print quality (lines, faded colors)
Ensure you are using genuine HP ZINK paper. Clean the print head via the HP Sprocket app. Check that the paper is not exposed to light or moisture before printing.
App is not recognizing the printer
Verify that the printer is turned on and within Bluetooth range. Close and reopen the HP Sprocket app. Ensure your smartphone's operating system is updated.
Pros and Cons
Pros
- Extremely portable and lightweight for on-the-go printing.
- Uses ZINK technology, eliminating the need for ink and reducing ongoing costs.
- Prints are durable, smudge-proof, water-resistant, and tear-resistant.
- App offers fun creative tools for photo customization.
- Easy to set up and use with smartphone devices via Bluetooth.
Cons
- Requires specific ZINK photo paper, which can be an additional cost.
- Print quality may not match higher-end photo printers.
- App is required for most features, including customization.
- Battery life limits printing sessions without access to charging.
- Print size is fixed at 2"x3".
Setup, Compatibility & Care
Setup:
- Charge the Printer: Use the included Micro USB cable to charge the HP Sprocket.
- Load Paper: Open the printer cover and load the HP ZINK photo paper with the ZINK Smart Sheet facing down.
- Download App: Install the free HP Sprocket app from your device's app store (iOS or Android).
- Connect via Bluetooth: Turn on Bluetooth on your smartphone and follow the app's instructions to pair with the Sprocket.
Compatibility:
- Operating Systems: iOS 10.0 or later, Android 5.0 or later.
- Connectivity: Bluetooth 5.3.
Care:
- Cleaning the Printer: Wipe the exterior with a soft, dry cloth. Avoid moisture. Use a lint-free cloth for the paper path if necessary.
- Cleaning the Print Head: If print quality degrades, use the cleaning function within the HP Sprocket app.
- Storage: Store the printer and ZINK paper in a cool, dry place.