Armstead Trade Quick Dry Gloss 2.5L - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Armstead Trade Quick Dry Gloss, a water-based paint designed for both interior and exterior wood and metal surfaces. The key benefit is its quick-drying and non-yellowing formula, providing a durable, high-gloss finish. Keep in mind that drying times are dependent on temperature and humidity. This guide will walk you through the features, uses, and care of Armstead Trade Quick Dry Gloss.
All features
| Colour | White |
|---|---|
| Model Part Number | 5218646 |
| Brand | Armstead Trade |
Extended Product Information
FAQs
What surfaces can I use this paint on?
Armstead Trade Quick Dry Gloss is suitable for interior and exterior wood and metal surfaces.
How long does it take to dry?
Touch dry in 2-4 hours, recoat in 4-6 hours. Drying times depend on temperature and humidity.
Do I need to prime before applying the gloss?
Yes, it is recommended to use a primer/undercoat, especially on new or bare surfaces. For best results, use Armstead Trade Quick Dry Wood Primer Undercoat.
How much paint do I need?
The product provides a surface coverage of 15 m²/L. Consider the number of coats required.
Can I use this in a bathroom?
Yes, it is suitable for use in bathrooms due to its durability and moisture resistance.
How do I clean up after painting?
Clean brushes and rollers with water immediately after use.
What is the VOC content?
The VOC content is low (0.3 - 7.99%).
How should I store leftover paint?
Store in a cool, dry place and avoid extreme temperatures.
Troubleshooting
Paint is not drying properly.
Ensure the room temperature is within the recommended range. Check for excessive humidity and improve ventilation. Make sure the surface is properly prepared.
Paint is showing brush marks.
Apply the paint in thin, even coats and avoid over-brushing. Use a high-quality brush or roller. Ensure the paint is stirred well.
Paint is peeling.
Ensure the surface is properly prepared and primed. Remove any loose paint or contaminants before repainting.
Pros and Cons
Pros
- Quick drying time saves time on projects.
- Non-yellowing formula ensures a lasting, bright white finish.
- Water-based for easy cleanup and low odor.
- Suitable for both interior and exterior applications, increasing versatility.
- Durable finish provides long-lasting protection.
Cons
- Drying time is dependent on environmental conditions.
- Requires proper surface preparation for optimal results.
- May require multiple coats for full coverage, particularly on new surfaces.
- Gloss finishes can highlight surface imperfections.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from loose paint, rust, or grease. Sand down any imperfections.
- Priming: For new or bare surfaces, apply an appropriate primer/undercoat such as Armstead Trade Quick Dry Wood Primer Undercoat before applying the gloss.
- Application: Stir the paint thoroughly before use. Apply the paint evenly using a brush or roller.
- Coats: Apply one or two coats, allowing the recommended drying time between coats (4-6 hours).
- Tool Cleaning: Clean brushes and rollers with water immediately after use.
- Storage: Store in a cool, dry place. Avoid extreme temperatures.
Compatibility: This paint is compatible with most standard primers and undercoats for wood and metal. Always test a small area for compatibility before applying to the entire surface.