Ronseal uPVC Paint Satin - White 750ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners seeking to revitalize their uPVC windows and doors with a durable, long-lasting paint. The primary benefit of Ronseal uPVC Paint is its ability to directly adhere to uPVC surfaces without a primer, saving time and effort. However, it's crucial to apply the paint in appropriate weather conditions, avoiding cold or wet days for optimal results. This guide will help you understand how to use Ronseal uPVC Paint effectively, covering everything from surface preparation to application and maintenance.
All features
| Colour | White |
|---|---|
| Model Part Number | 39392 |
| Brand | Ronseal |
Extended Product Information
FAQs
How much area does one can cover?
One litre of Ronseal uPVC Paint covers approximately 6.5 square meters.
Do I need to use a primer?
No, Ronseal uPVC Paint can be applied directly to the uPVC surface without the need for a primer.
How long does it take for the paint to dry?
It is dry to the touch in 1 hour and rain-ready in 1 hour. Allow 2-4 hours between coats.
Can I use a sprayer to apply the paint?
Yes, Ronseal uPVC Paint can be applied with a brush, roller, or sprayer.
What is the best way to prepare the surface before painting?
Clean the surface with warm soapy water, rinse, and let it dry. Lightly sand the surface to provide a key for the paint to adhere. Remove any loose paint or debris.
What colours are available?
Ronseal uPVC Paint is available in various colours, including White, Black, Grey, Blue and Green, and several others in Satin finish
Can I apply the paint in cold weather?
It is best to apply the paint in a warm, dry environment above 10 degrees C.
What type of finish does the paint have?
The paint has a satin finish
Troubleshooting
Paint is not drying properly.
Ensure the application conditions are within the recommended temperature range (above 10°C) and that the weather is dry.
Paint is flaking or peeling.
Ensure the surface was properly prepared, including cleaning and sanding. If the previous paint was not compatible, consider using a primer designed for uPVC.
Poor coverage.
Apply additional coats, allowing each coat to dry completely before applying the next. For dark colours, more coats may be needed.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Provides a long-lasting, durable finish.
- Flexible formula resists cracking.
- Mould-resistant, keeping your uPVC looking cleaner for longer.
- Quick drying time allows for faster project completion.
Cons
- Requires suitable weather conditions for optimal results.
- May require multiple coats for complete coverage, especially over dark colours.
- Surface preparation is essential for best adhesion.
Setup, Compatibility & Care
- Preparation:
- Ensure the surface is clean, dry, and free from dirt, dust, and grease.
- Wash the surface with warm soapy water, rinse, and leave to dry thoroughly.
- Make sure the surface is smooth.
- Repair any damaged areas before painting.
- Lightly sand the area to give it an even finish (use 180-220 grit sandpaper). If painting over previously painted uPVC in good condition, lightly sand with 240 grit sandpaper. If it's flaking, sand it off with 120 grit sandpaper.
- Wear a face mask to protect yourself from dust.
- Clean up any dust and wipe with a damp cloth.
- Application:
- Stir the paint thoroughly before use.
- Apply with a brush, roller, or sprayer.
- Apply 2-3 coats, allowing 2-4 hours of drying time between coats.
- The last coat will be waterproof in 1 hour.
- Weather Conditions:
- Apply on a warm, dry day above 10 degrees C, not likely to rain.
- Avoid painting in cold or wet weather.
- Compatibility:
- Compatible with uPVC surfaces.
- Suitable for both interior and exterior use.