Revit Surface Textile Jacket - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Revit Surface Textile Jacket in Black is designed for adult male riders seeking a highly flexible and comfortable off-road jacket that meets Class AA safety standards. Its key benefit is maximizing freedom of movement through extensive stretch PWR|Shell fabric and an open-knit construction, ideal for intense outdoor riding. A potential caveat is that the focus on stretch and breathability might mean it's best suited for milder conditions or layering for colder weather.
All features
| Gender | Male |
|---|---|
| Age Group | adult |
| Colour | Black |
| Material | Polyester |
| Model Part Number | FJT386 - 0010-L |
| Brand | Revit |
Extended Product Information
FAQs
Is this jacket waterproof?
The Revit Surface Textile Jacket is designed with breathability and stretch as primary features, making it water-resistant rather than fully waterproof. It is suitable for light rain or splashes, but for prolonged heavy downpours, a dedicated waterproof layer is recommended.
What type of riding is this jacket best suited for?
This jacket is ideal for off-road, adventure, and dual-sport riding due to its exceptional flexibility, comfort, and Class AA safety rating. It is also suitable for warmer weather commuting where freedom of movement is important.
Does it come with a back protector?
No, the SEESOFT™ Level 2 back protector is not included with the jacket. It is prepared for its insertion and can be purchased separately if desired.
How do I clean the jacket?
Remove all protectors before washing. Machine wash on a gentle cycle at 30°C with mild detergent. Do not bleach, iron, or tumble dry. Hang to air dry away from direct sunlight.
What makes this jacket 'full-stretch'?
The jacket utilizes PWR|Stretch and PWR|Shell CORDURA® 750D Ripstop fabrics with an open-knit construction. This combination maximizes flexibility and allows for a wide range of motion, enhancing comfort during active riding.
Can I connect this jacket to riding pants?
Yes, the jacket features a short connection zipper that allows it to be attached to compatible Revit riding pants for a more secure riding setup.
What is the safety certification of this jacket?
The jacket is certified according to EN 17092-3:2020, which corresponds to protection class AA. This indicates a high level of abrasion resistance and impact protection for motorcycle riding.
Troubleshooting
Jacket feels too tight or restrictive
Ensure all adjustment points (waist drawstring, cuffs) are loosened. Verify you have the correct size by checking the size chart against your body measurements. Remember, the jacket is designed for stretch, but proper sizing is still crucial.
Water seeping through in heavy rain
This jacket is primarily designed for off-road and adventure riding with a focus on breathability and stretch, not as a fully waterproof garment. For heavy rain, consider using a separate waterproof outer layer or a dedicated waterproof riding suit.
Reflective elements are fading
Avoid prolonged exposure to direct sunlight when not in use. Follow the washing instructions carefully, as harsh detergents or high washing temperatures can degrade reflective materials over time.
Zipper is difficult to operate
Ensure no fabric is caught in the zipper teeth. Gently try to move the zipper up and down. If it persists, apply a small amount of wax or silicone lubricant to the zipper teeth.
Pros and Cons
Pros
- Exceptional freedom of movement due to full stretch construction.
- High level of safety with Class AA certification and included protectors.
- Enhanced visibility with strategically placed reflective elements.
- Comfortable and breathable for active riding in suitable conditions.
- Practical storage options with multiple pockets.
Cons
- May require layering for warmth in colder weather due to focus on breathability.
- CORDURA® 750D, while durable, might be less abrasion-resistant than heavier materials in extreme impacts.
- Back protector is not included and needs to be purchased separately.
- Specific sizing may vary, requiring careful measurement or trying on.
Setup, Compatibility & Care
Setup:
- Protector Insertion: If you have purchased a SEESOFT™ Level 2 back protector, insert it into the designated pocket inside the jacket lining. Ensure it is correctly seated and lies flat.
- Adjustments: Utilize the drawstring at the waist and the stretchable cuffs to achieve a snug and comfortable fit.
- Thumb Loops: For added security and to prevent sleeves from riding up, engage the thumb loops.
Compatibility:
- Back Protector: Compatible with SEESOFT™ Level 2 Type RV back protectors (sold separately).
- Connection Zipper: The jacket features a short connection zipper, allowing it to be attached to compatible Revit riding pants. Check your pant’s manual for zipper compatibility.
Care Instructions:
- Washing: Machine wash at 30°C (86°F) on a gentle cycle. Use a mild detergent. Do NOT bleach, iron, or tumble dry.
- Cleaning Protectors: Remove all protectors before washing. Hand wash protectors separately in lukewarm water with mild soap. Allow them to air dry completely.
- Drying: Hang the jacket to dry naturally. Avoid direct sunlight for extended periods to preserve fabric integrity and color.
- Storage: Store in a cool, dry place away from direct heat and sunlight.