Plasti Dip Blaze Rubber Paint - Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Plasti Dip Blaze Red is an air-dry, specialty rubber coating designed for DIY enthusiasts, automotive hobbyists, and home improvers who need a flexible, protective finish that withstands harsh environmental conditions. The primary benefit of this product is its ability to provide a durable, non-slip, and impact-resistant layer that will not crack or become brittle over time; however, users should note that to achieve the most vibrant fluorescent effect, applying it over a white base coat is essential.
All features
| Colour | Red |
|---|---|
| Brand | Plasti Dip |
Extended Product Information
FAQs
Is Plasti Dip permanent?
It is considered semi-permanent; it is designed to be durable and long-lasting, but it can be peeled off when you want to revert to the original surface.
Can I use this on engine parts?
Plasti Dip is heat resistant to a certain degree, but it is not intended for high-heat surfaces like exhaust manifolds or engine blocks directly.
Do I need a primer?
No primer is needed, but for Blaze colors, a white Plasti Dip base coat is required for the best color results.
How long does it take to dry?
It is air-dry. It typically dries to the touch in 30 minutes, but it is recommended to let it cure for at least 4-8 hours for full strength.
Is it safe for all surfaces?
It works on metal, wood, glass, and plastic, but it is recommended to test on an inconspicuous area first to ensure compatibility.
Troubleshooting
Coating is thin and hard to peel off
You likely applied too few layers. Ensure at least 4-5 coats are applied to reach the thickness required for easy removal.
Blaze red looks dull or dark
You skipped the recommended white base coat. Always apply white Plasti Dip as a primer for all Blaze fluorescent colors.
Coating is bubbling or lifting
The surface was likely contaminated with wax, oil, or moisture. Clean the area thoroughly with a degreaser before re-applying.
Pros and Cons
Pros
- Extremely durable against weather and chemicals
- Remains flexible in extreme temperature conditions
- Provides a functional non-slip grip
- Easy to apply with multiple methods
- Does not become brittle or crack over time
Cons
- Requires a white base coat for maximum brightness
- May require multiple coats for even coverage
- Surface preparation is vital for long-term adhesion
Setup, Compatibility & Care
Before application, ensure the substrate is free of dust, grease, and moisture to guarantee proper adhesion. If you are using the Blaze fluorescent red, apply a base layer of white Plasti Dip first; this creates a high-contrast background that makes the fluorescent pigments pop. For the best results, work in a well-ventilated area with a steady temperature. If you decide to remove the coating in the future, it can typically be peeled off by hand, provided the initial coating was applied at a sufficient thickness. Keep the finished product away from harsh solvents that might dissolve the rubber structure.