Rustins ASAP All Surface Paint - Blue - 250ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Rustins Quick Dry ASAP All Surface All Purpose Paint (Blue, 250ml). This paint offers a quick-drying, satin finish suitable for various surfaces, eliminating the need for a primer in many cases. However, ensure proper surface preparation for optimal results.
All features
| Colour | Blue |
|---|---|
| Model Part Number | ASAPBU250 |
| Brand | Rustins |
Extended Product Information
FAQs
What surfaces can I use this paint on?
You can use this paint on UPVC, most plastics, timber, metal, tiles, stone, and bricks.
Do I need to use a primer?
In most cases, a primer is not needed. However, proper surface preparation is always recommended. For metal surfaces, it may be beneficial to use a metal primer.
How long does it take to dry?
It is touch dry in approximately 30 minutes, with a re-coating time of 2-3 hours.
What is the coverage?
The coverage is approximately 12-14m² per litre.
How do I clean the brushes and rollers?
Clean brushes and rollers with water immediately after use.
Can I use this paint outdoors?
Yes, this paint is suitable for both indoor and outdoor use.
Is the paint water-based?
Yes, it is a water-based paint.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared (clean, dry, and lightly sanded if necessary). Apply a thin first coat and allow it to dry completely before applying subsequent coats.
Paint is flaking or peeling.
Make sure the surface is completely free of any loose paint. Consider using a primer if the surface is particularly difficult to adhere to.
Uneven finish or brush marks.
Apply the paint evenly and avoid overbrushing. Using a good quality brush or roller helps. Ensure paint is stirred properly.
Pros and Cons
Pros
- Quick drying time minimizes project downtime.
- Suitable for a wide range of surfaces, reducing the need for multiple products.
- Easy to apply, making it suitable for both professionals and DIY enthusiasts.
- The satin finish provides a visually appealing look.
Cons
- Requires proper surface preparation for optimal adhesion.
- Re-coating time of 2-3 hours might require planning.
- Coverage is approximately 12-14m² per litre, which needs to be considered for large projects.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and any previous coatings that may be flaking. Lightly sand glossy surfaces to improve adhesion.
- Application: Stir the paint thoroughly before use. Apply the paint evenly using a brush or roller. Two thin coats are generally recommended, allowing 2-3 hours between coats.
- Cleaning: Clean brushes and rollers with water immediately after use.
- Compatibility: This paint is compatible with a wide range of surfaces. However, it's always recommended to test the paint on a small, inconspicuous area first, especially on unknown materials.
- Storage: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container sealed when not in use.