Guard FP Floor Paint - Grey
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Guard FP Floor Paint in Grey is designed for industrial and commercial environments requiring a durable, glossy floor coating that can withstand frequent pedestrian to light traffic. It offers a cost-effective solution for internal spaces like garage floors and warehouses, providing good chemical resistance. While easy to apply and recoat, its glossy finish may show scuffs more readily than satin alternatives.
All features
| Colour | Grey |
|---|---|
| Brand | Guard |
Extended Product Information
FAQs
What type of surface is this paint suitable for?
Guard FP Floor Paint is designed for concrete floors in internal industrial and commercial environments, such as garages, warehouses, and workshops.
How many coats of paint are recommended?
Typically, two coats are recommended for optimal durability and finish. Follow specific instructions on the product packaging for best results.
What is the drying time for Guard FP Floor Paint?
Drying times can vary based on temperature and humidity. Generally, it is touch-dry within 2-4 hours and ready for recoating after 12-24 hours. Full cure may take several days.
Can this paint be used outdoors?
No, Guard FP Floor Paint is specifically formulated for internal environments and is not recommended for exterior use.
How do I clean the painted floor?
Clean spills immediately. For regular cleaning, use a damp mop with a mild detergent. Avoid abrasive cleaners.
What is the chemical resistance like?
The paint offers good resistance to common industrial chemicals and spills, protecting the underlying surface.
What colors are available?
Guard FP Floor Paint is available in Light Grey (RAL 7035), Grey (BS 00 A 05), Dark Grey (RAL 7016), Yellow (RAL 1018), and Blue (RAL 5010).
Troubleshooting
Paint is not adhering properly
Ensure the surface was thoroughly cleaned and prepared, free of dust, grease, or moisture. A suitable primer may be required.
Uneven or streaky finish
Apply thinner, more even coats. Ensure the roller or brush is adequately loaded and move consistently. Check for temperature and humidity conditions during application.
Slow drying time
Verify application conditions are within the recommended temperature and humidity range. Ensure adequate ventilation. Thicker coats may take longer to dry.
Gloss finish appears dull
This can sometimes occur due to humidity during drying or improper application. Ensure good ventilation and check temperature conditions. Recoating may restore a uniform gloss.
Pros and Cons
Pros
- Durable and hard-wearing finish suitable for high-traffic areas.
- Good resistance to common chemicals and spills.
- Easy to apply, making it user-friendly for DIY and professional application.
- Cost-effective for long-term maintenance and recoating.
- Enhances the appearance of industrial and commercial floors.
Cons
- Glossy finish can be slippery when wet if not properly managed.
- Glossy finish may highlight imperfections or scuffs more than a matte or satin finish.
- Requires adequate ventilation during application and drying.
- Not suitable for heavy vehicle traffic or extreme chemical exposure.
Setup, Compatibility & Care Instructions
Preparation is Key: Ensure the surface is clean, dry, and free from dust, grease, and old coatings. For best adhesion, prime concrete surfaces with a suitable primer. Allow primer to dry completely before application.
Application: Apply using a brush, roller, or spray. Work in well-ventilated areas. Apply thin, even coats. Avoid applying in temperatures below 10°C (50°F) or above 30°C (86°F). Allow adequate drying time between coats as per manufacturer's instructions.
Compatibility: Guard FP Floor Paint is designed for concrete floors in internal environments. It is not recommended for exterior use or surfaces exposed to constant water immersion.
Care: Clean spills immediately. For routine cleaning, use a damp mop and mild detergent. Avoid harsh abrasive cleaners, as they can damage the glossy finish over time. Periodic recoating will help maintain the paint's protective properties and appearance.