Araldite METAL Ultra Adhesive - Grey - ARA400010
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Araldite METAL Ultra Adhesive. This powerful adhesive provides a strong, long-lasting bond for metal repairs, offering a reliable solution for various applications. Keep in mind that while it bonds quickly, achieving full strength takes a few hours. This guide will help you understand how to use it effectively.
All features
| Colour | Grey |
|---|---|
| Model Part Number | ARA400010 |
| Brand | Araldite |
Extended Product Information
FAQs
How long does it take for Araldite METAL Ultra Adhesive to set?
It sets in approximately 5 minutes. Full bond strength is achieved in 4 hours.
Can I paint over the adhesive?
Yes, once the adhesive is fully cured, you can paint over it.
Is Araldite METAL Ultra Adhesive water-resistant?
Yes, it is water-resistant.
What is the temperature resistance of this adhesive?
It is temperature resistant from -30°C to 100°C.
What types of metals can I use it on?
It is suitable for steel, galvanized steel, cast-iron, copper, and brass.
Can I sand the adhesive?
Yes, once fully cured, it can be sanded.
What should I do if the adhesive gets on my skin?
Wash the affected area immediately with soap and water.
How should I store the adhesive?
Store it in a cool, dry place.
Troubleshooting
Bond is weak or fails.
Ensure surfaces were properly cleaned and roughened before applying. Use the correct ratio of components and allow a full 4 hours to cure.
Adhesive doesn't set.
Make sure you mixed the two components thoroughly. Check the product's expiration date.
Adhesive is difficult to dispense.
Ensure the nozzle is clear. If needed, cut the tip of the tubes to allow for easier dispensing. Apply consistent pressure when dispensing.
Pros and Cons
Pros
- Fast setting time allows for quick repairs.
- Provides a strong and durable bond.
- Water-resistant properties make it suitable for various environments.
- Gap-filling capabilities allow for use on uneven surfaces.
- Can be painted and sanded for a seamless finish.
- Resistant to a wide range of chemicals and impacts.
Cons
- Full bond strength requires 4 hours.
- May not be suitable for all types of plastics.
- Working time is limited to 4 minutes for repositioning.
- Requires proper surface preparation for optimal adhesion.
- Not recommended for use in high-stress, flexible applications.
Setup, Compatibility & Care
- Surface Preparation:
- Clean the surfaces to be bonded with a degreaser or solvent.
- Lightly roughen the surfaces with sandpaper for better adhesion.
- Ensure the surfaces are dry before applying the adhesive.
- Mixing and Application:
- Dispense equal parts of the two components.
- Mix thoroughly until a uniform color is achieved.
- Apply the mixture to the prepared surfaces.
- Assemble the parts within the 4-minute repositioning time.
- Curing:
- Hold the parts together for approximately 5 minutes until set.
- Allow 4 hours for full strength to develop.
- Avoid stressing the bond during the curing period.
- Compatibility:
- Suitable for use on most metals including steel, galvanized steel, cast-iron, copper, and brass.
- Check for compatibility with other materials before use.
- Care:
- Store in a cool, dry place.
- Use in a well-ventilated area.
- Clean up excess adhesive immediately with a solvent like acetone.
- Dispose of waste responsibly.