Nuie Arno Wall Hung 2 Drawer Vanity Unit and Ceramic Basin - Bleached Oak, Brown

Currently unavailable

Currently unavailable
The Nuie Arno 800mm Wall Hung 2 Drawer Vanity Unit with Mid Edge Ceramic Basin in Bleached Oak Woodgrain is designed for homeowners seeking a modern, space-saving storage solution for their bathroom. Its key benefit is providing ample concealed storage with a stylish, contemporary aesthetic, while the wall-hung design simplifies floor cleaning. A potential caveat is that the tap and waste are sold separately, requiring additional purchases.
| Colour | Brown |
|---|---|
| Model Part Number | ARN3026A |
| Brand | Nuie |
The Ceramic Furniture Basin measures W:800mm x H:500mm x D:390mm. The Arno Vanity Unit measures W:800mm x H:539mm x D:383mm.
No, the basin tap and waste are sold separately. You will need to purchase these items in addition to the vanity unit.
Wipe the woodgrain finish with a soft, damp cloth. For tougher marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbing.
No, this is specifically a wall-hung vanity unit designed to be mounted onto the wall.
The unit is compatible with mono basin mixer taps. Ensure the tap you choose has adequate reach and height for the basin.
The unit should be securely fixed to the wall. For optimal support, it is recommended to fix into wall studs. Consult a professional installer for specific weight-bearing capacities based on your wall type.
Check for any obstructions within the drawer runners. Ensure the drawer is properly seated on its runners and that no items inside are preventing full closure.
Ensure the waste trap and connections are securely tightened. Check the rubber seals for damage and replace if necessary. Professional plumbing advice may be needed.
The wall fixings may not be adequate or properly secured. Re-tighten the mounting screws and check the integrity of the wall fixings. Professional assessment of wall type and fixings is advised.
Setup: The unit is designed for wall mounting. Ensure your wall is suitable for supporting the weight of the vanity unit and basin, ideally mounting onto wall studs or using appropriate heavy-duty wall fixings. Plumbing connections will need to be made to the basin and waste outlet. Professional installation is recommended.
Compatibility: This vanity unit is compatible with standard mono basin mixer taps. Please note that the tap, waste, and overflow are sold separately. Ensure your chosen tap has the correct reach and height for the basin.
Care: Clean the ceramic basin with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads, which can scratch the surface. The woodgrain finish of the vanity unit can be wiped clean with a damp cloth. For stubborn marks, use a non-abrasive cleaner. Ensure no excess water is left standing on the surfaces, especially around the basin edge and drawer fronts.