Stanley Quencher H2.O FlowState™ Tumbler - Yellow - 1180 ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Stanley Quencher H2.O FlowState™ Tumbler in Yellow, with a 1180 ml capacity, is designed for individuals seeking to maintain consistent hydration throughout the day with a large-capacity, convenient, and durable beverage container. Its key benefit is superior temperature retention, keeping drinks cold for up to 9 hours and iced for 40 hours. A potential caveat is its substantial size, which may be cumbersome for some users or in certain cup holders. This tumbler features a sturdy handle, a narrow base for cup holder compatibility, and a splash-free FlowState™ lid with a reusable straw, all constructed from recycled stainless steel.
All features
| Colour | Yellow |
|---|---|
| Container Volume | 1180 |
| Weight Grams | 635 |
| Brand | Stanley |
Extended Product Information
FAQs
What is the capacity of this tumbler?
The Stanley Quencher H2.O FlowState™ Tumbler has a capacity of 1180 ml (approximately 40 oz).
How long does it keep drinks cold?
It keeps drinks cold for up to 9 hours and iced for up to 40 hours, thanks to its double-wall vacuum insulation.
Is the tumbler safe for hot beverages?
This tumbler is designed primarily for cold beverages and iced drinks. It is not recommended for hot liquids as the insulation is optimized for cooling and could lead to scalding if contents are too hot.
Can I put this tumbler in the dishwasher?
Yes, the Stanley Quencher H2.O FlowState™ Tumbler and its lid are top-rack dishwasher safe for easy cleaning.
What are the dimensions of the tumbler?
The dimensions are approximately 9.8 cm (width at base) x 14.8 cm (width at top) x 31.2 cm (height).
What material is the tumbler made from?
The tumbler is constructed from recycled stainless steel with a powder coat finish. It is also BPA-free.
Does it fit in standard cup holders?
Yes, its narrow base is designed to fit most standard car cup holders.
Troubleshooting
Tumbler is not keeping drinks cold as long as expected.
Ensure the lid is tightly sealed and the straw is properly inserted. Check for any visible damage to the vacuum seal. Allow the tumbler to pre-chill with ice water before filling with your beverage.
Water leaking from the lid or straw.
Verify that the FlowState™ lid is fully closed and that the reusable straw is correctly seated in the lid. Ensure the tumbler is not overfilled, which can cause spillage when the lid is attached.
Difficulty cleaning the reusable straw.
Use a long, narrow cleaning brush specifically designed for straws. Flush the straw thoroughly with warm, soapy water after each use. The straw is top-rack dishwasher safe, but a brush ensures all residue is removed.
Powder coat finish is chipping or scratching.
While durable, the powder coat can be damaged by sharp impacts or abrasive cleaning. Avoid dropping the tumbler and use only soft cloths or sponges for cleaning. Handwashing is recommended for preserving the finish.
Pros and Cons
Pros
- Excellent long-lasting temperature control for both cold and iced beverages.
- Large capacity minimizes the need for frequent refills.
- User-friendly design with a comfortable handle and secure, splash-free lid.
- Fits in most standard car cup holders due to its narrow base.
- Durable construction using recycled stainless steel.
- Easy to clean as it is dishwasher safe.
Cons
- The 1180 ml capacity can be bulky and heavy when full.
- The straw mechanism may require specific cleaning attention.
- Powder coat finish, while durable, may show wear over time with heavy use.
- Not suitable for hot beverages due to insulation design.
- May not fit in all specialized or smaller cup holders.
Setup, Compatibility & Care
Setup:
Your Stanley Quencher H2.O FlowState™ Tumbler is ready to use right out of the box. Ensure the reusable straw is properly inserted into the lid mechanism.
Compatibility:
- Cup Holders: Designed to fit most standard car cup holders (diameter of base is approximately 10 cm).
- Beverages: Suitable for cold beverages, iced drinks, and water. Not designed for hot liquids.
- Cleaning: The tumbler and lid are top-rack dishwasher safe.
Care Instructions:
- For best results, wash the tumbler before its first use.
- While dishwasher safe, handwashing with warm, soapy water can help preserve the powder coat finish and extend the product's lifespan.
- Avoid using abrasive cleaners or scouring pads, which can scratch the finish.
- Ensure all parts are completely dry before reassembling or storing to prevent moisture buildup.