Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Crucial Pro Overclocking 32GB DDR5 Memory Kit is designed for gamers and professionals looking to boost their PC's performance. It offers a significant improvement in multitasking and responsiveness, leading to smoother gameplay and faster load times. However, ensure your system is compatible with DDR5 memory before purchase. This kit features two 16GB modules, operating at 6000MT/s, and supports Intel XMP 3.0 and AMD EXPO for easy overclocking.
| Colour | White |
|---|---|
| Series | Pro |
| Model Part Number | CP2K16G60C36U5W |
| Brand | Crucial |
XMP (Intel Extreme Memory Profile) is a pre-defined profile for overclocking Intel-based systems, while EXPO (AMD Extended Profiles for Overclocking) is designed for AMD Ryzen systems. Both allow for easy overclocking through the BIOS.
Enter your computer's BIOS setup (usually by pressing Del, F2, or another key during startup). Look for the XMP or EXPO setting and enable the appropriate profile. Save the changes and exit the BIOS.
No, this memory kit is DDR5, and it is not compatible with older motherboards that use DDR4 or DDR3 memory. You need a motherboard that specifically supports DDR5 memory.
The Crucial Pro Overclocking 32GB DDR5 Memory Kit is backed by a lifetime warranty.
Overclocking, if done within the specified limits and without causing damage, typically does not void the warranty. However, exceeding the specifications or causing damage through overclocking might void the warranty.
CAS latency (Column Address Strobe latency) is a measure of the delay between when the memory controller requests data from the memory module and when the data is available. Lower CAS latency generally means faster performance.
Check your motherboard's specifications to ensure it supports DDR5 memory. Confirm compatibility with your CPU (Intel Core 12-14th Gen or AMD Ryzen 7000 Series and higher).
Ensure the memory modules are properly seated in the slots. Check the motherboard manual for correct slot placement. Try booting with only one module installed to identify if a module is faulty. Reset the CMOS by removing the battery on the motherboard for a few minutes.
Enable XMP or EXPO in the BIOS to activate the memory's rated speed. Confirm the speed in the BIOS or operating system (e.g., Task Manager in Windows).
Reduce the memory clock speed or timings in the BIOS. Increase the memory voltage slightly, if necessary. Check for other hardware compatibility issues.
Ensure all memory modules are properly installed. Check the BIOS to see if all modules are detected. Run a memory diagnostic tool to identify potential issues.
