Hexagon Kitchen Cabinet Handles - Handle & Home - Gold
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These Handle & Home Hexagon T-bar pulls are designed for homeowners looking to add a modern, geometric touch to their cupboards and drawers. Their key benefit lies in their unique hexagonal shape and statement rose gold copper finish, offering a distinctive design element. A potential caveat is that the visible brushstrokes, while adding texture, may not suit minimalist aesthetics. This hardware features sharp, straight edges in a T-bar design, finished in a brushed rose gold copper, made from durable aluminum.
All features
| Colour | Gold |
|---|---|
| Model Part Number | HH2421HRG |
| Brand | Handle & Home |
Extended Product Information
FAQs
What material are these handles made of?
The handles are made from aluminum with a rose gold copper finish.
What is the distance between the screw holes?
The hole centers are 160mm apart.
What size screws are included?
The handles are supplied with 25mm M4 screws.
Can I use these on a metal cabinet?
While primarily designed for wood-based cabinetry, they can be fitted to metal surfaces if appropriate drilling and screw-fixing methods are used. Ensure compatibility with your specific metal cabinet.
How should I clean the rose gold finish?
Use a soft, damp cloth. Avoid abrasive cleaners to protect the textured finish.
What is the overall length of the handle?
The total length of the handle is 224mm.
Will the brushstroke texture wear off?
The brushstroke effect is part of the finish. With normal use and proper care, it should remain intact. Avoid aggressive cleaning or scratching.
Troubleshooting
Screws do not fit.
Ensure you are using the supplied 25mm M4 screws. If using different screws, verify they are M4 size and appropriate length for your cabinet thickness.
Handle is wobbly after installation.
Check that the screws are fully tightened. Ensure the pilot holes were drilled correctly at 160mm centers and are clean.
Finish appears scratched or dull.
The finish is textured. If actual scratches have occurred, clean gently with a soft damp cloth. Avoid harsh chemicals or abrasive cleaning tools. For significant damage, replacement might be necessary.
Hole spacing does not match.
These handles require 160mm center-to-center hole spacing. If your existing holes are different, new holes will need to be drilled.
Pros and Cons
Pros
- Adds a modern and unique design element to furniture.
- The rose gold copper finish is a statement piece.
- Durable aluminum construction ensures longevity.
- Visible brushstrokes add a unique texture and depth.
- Comes with necessary screws for easy installation.
Cons
- The brushed finish and bold color might not suit all interior design styles.
- Larger size may be too prominent for very small cabinets or drawers.
- The hexagonal shape, while modern, might be perceived as less classic by some.
- Requires pre-drilled holes at 160mm centers for installation.
- Aluminum, while durable, can be softer than steel and may scratch if subjected to harsh abrasion.
Setup, Compatibility & Care
Setup:
- Ensure you have the correct drill bit size for M4 screws.
- Measure and mark the desired location for the screw holes on your cabinet or drawer, ensuring a 160mm gap between the centers of the holes.
- Drill pilot holes at the marked locations.
- Align the handle with the pilot holes.
- Insert the supplied 25mm M4 screws from the inside of the cabinet/drawer and tighten them into the handle.
Compatibility:
- Designed for standard cabinet and drawer fronts.
- Requires pre-drilled holes with 160mm (6.3 inches) center-to-center spacing.
- Suitable for wood, MDF, and particleboard cabinetry.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can damage the rose gold finish and brushstrokes.
- Wipe dry with a clean cloth immediately after dampening.
- Periodically check screws for tightness.