Coo-Var Anti-Slip Step & Ramp Paint - Black
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to create a safe, slip-resistant surface on steps, ramps, and walkways using Coo-Var Anti-Slip Step & Ramp Paint in Black. The primary benefit is a durable, hard-wearing finish that reduces the risk of slips, even in wet conditions. A key consideration is proper surface preparation for optimal adhesion and longevity.
All features
| Colour | Black |
|---|---|
| Brand | Coo-Var |
Extended Product Information
FAQs
What surfaces can I use this paint on?
You can use this paint on concrete, wood, tarmac, stone, brickwork, and suitably prepared metal.
Do I need to prime the surface before painting?
Yes, metal surfaces require priming with Coo-Var All Metals Primer before applying the anti-slip paint.
How many coats of paint are required?
For best results, apply two coats, allowing six hours of drying time between each coat.
How long does the paint take to dry?
The paint is fast-drying, with a recoat time of approximately six hours.
Can this paint be used outdoors?
Yes, Coo-Var Anti-Slip Step & Ramp Paint is suitable for both indoor and outdoor use.
How should I clean the painted surface?
Clean the painted surface with mild soap and water. Avoid using abrasive cleaners.
What is the finish like?
The paint has a smooth matt finish.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and prepared. If applying to metal, check that primer has been applied and allowed to dry completely.
The surface remains slippery after application.
Ensure that the paint has fully dried and that the recommended number of coats has been applied. Re-apply a second coat if needed.
Paint colour is uneven.
Ensure even application, using consistent strokes. Multiple thin coats are better than one thick coat.
Pros and Cons
Pros
- Significantly reduces the risk of slips and falls.
- Suitable for both indoor and outdoor applications.
- Easy to apply with readily available tools.
- Durable and long-lasting finish.
- Water-based formula offers low odour and quick drying times.
Cons
- Requires thorough surface preparation for optimal results.
- Metal surfaces require priming before application.
- May require multiple coats for complete coverage.
- Colour selection is limited to available variants.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from dirt, grease, and any loose materials. Remove any existing coatings that are flaking or damaged.
- Priming (for Metal): For metal surfaces, apply Coo-Var All Metals Primer before applying the anti-slip paint.
- Application: Apply the paint using a brush or roller, ensuring even coverage. Allow six hours between coats.
- Compatibility: This paint is compatible with concrete, wood, tarmac, stone, brickwork, and primed metal.
- Care: Clean the painted surface regularly with mild soap and water. Avoid using abrasive cleaners or tools that may damage the finish.