Grandeco Ciara Heron Wallpaper - Blue - A63202



Currently unavailable



Currently unavailable
This Grandeco Ciara Heron wallpaper in blue is designed for homeowners seeking to bring a tranquil, tropical ambiance into their living spaces. Its key benefit is the 'Paste the Wall' application, which simplifies the decorating process. A potential caveat is that the embossed finish, while adding depth, may require careful handling during application to avoid damage.
| Pattern | Animal |
|---|---|
| Colour | Blue |
| Model Part Number | A63202 |
| Brand | Grandeco |
'Paste the Wall' wallpaper means you apply the adhesive directly to your wall, not to the back of the wallpaper. This method eliminates the need for a pasting table and reduces the soaking time, making the application process simpler and cleaner.
Measure the height and width of each wall you intend to cover. Add a few inches to each measurement for trimming. Divide the total width of the wall by the width of the wallpaper roll (53 cm for this product) to determine the number of drops needed. Always round up to the nearest whole number and account for the pattern repeat.
It is generally recommended to remove old wallpaper before applying new wallpaper for best results. Ensure the wall surface is smooth, clean, and dry. If you choose to hang over existing wallpaper, ensure the old paper is securely adhered and flat.
Use a high-quality, ready-mixed or powder adhesive specifically designed for 'Paste the Wall' wallpapers. Always follow the adhesive manufacturer's instructions for mixing and application.
The embossed finish adds depth and texture. While it is designed to be durable for interior use, it should be treated with care to avoid scuffing or damage, especially during the application process.
This wallpaper is intended for general interior use. While it can add beauty to bathrooms and kitchens, excessive moisture or steam can affect its performance and longevity. Ensure good ventilation if using in these areas.
The product description does not specify the pattern repeat. Please refer to the product packaging or manufacturer's website for detailed pattern repeat information, as this is crucial for accurate pattern matching during installation.
Ensure the wall is properly prepared (clean, dry, and sound). Use the correct type and amount of adhesive as recommended for 'Paste the Wall' wallpapers. Check that the adhesive is applied evenly.
Use a wallpaper brush or smoothing tool to gently push air bubbles towards the edges as you hang each strip. If bubbles appear after drying, you may be able to carefully prick them with a fine needle and smooth them down.
Carefully adjust the positioning of the next strip before the adhesive sets. Ensure you are using the correct pattern repeat measurement. For significant misalignment, it may be necessary to remove and re-hang the affected strips.
Handle the wallpaper with care. Use a soft smoothing tool and avoid excessive pressure. If damage occurs, it may be difficult to repair without affecting the overall look; consider using that strip in a less visible area if possible.
Setup:
Compatibility:
This wallpaper is designed for application on most prepared interior walls, including drywall, plaster, and previously painted surfaces. Ensure surfaces are sound and free from contaminants.
Care:
To clean, gently wipe the surface with a slightly damp cloth. Avoid using abrasive cleaners or excessive moisture, as this can damage the embossed finish and the wallpaper itself.