Sandtex Trade Exterior Eggshell X-Tra - Black - 1L





Currently unavailable





Currently unavailable
This guide is for users of Sandtex Trade Exterior Eggshell X-Tra in Black, offering a durable, low-sheen finish for exterior wood and primed metal. The paint provides long-lasting protection, flexing with the substrate to prevent cracking. Remember to properly prepare surfaces for optimal results. This guide will cover key features, usage, and troubleshooting to help you achieve a professional finish.
| Colour | Black |
|---|---|
| Brand | Sandtex |
Sandtex Trade Exterior Eggshell X-Tra is suitable for exterior wood and suitably primed metal surfaces.
It is touch dry in 4-6 hours and ready for a second coat after 16 hours.
Yes, prime with a coat of Sandtex Flexible Primer Undercoat for best results.
Apply two full coats of the eggshell paint.
Ensure surfaces are clean and dry, abrade the surface for a good key, round off sharp edges, treat knots, and fill any imperfections.
Clean tools immediately after use with a suitable solvent.
It provides long-lasting durability for up to 10 years.
Ensure proper surface preparation, especially sanding to create a good key. Apply the paint in thin, even coats and avoid over-application.
Check the temperature and humidity levels. Ensure adequate ventilation. Make sure the surface is completely dry before painting.
Ensure proper application technique. Apply two coats as recommended. Check if the primer is suitable for the topcoat.