Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and DIY enthusiasts seeking to protect and enhance their outdoor wooden structures. The Ronseal Fence Life Plus Red Cedar paint offers excellent all-weather and UV protection with a convenient 1-hour drying time, making fence and shed maintenance quick and effective. While highly protective, ensure surfaces are properly prepared for optimal adhesion and finish.
| Colour | Red |
|---|---|
| Model Part Number | RSLFLPPRC5L |
| Brand | Ronseal |
No, Ronseal Fence Life Plus is specifically formulated for sheds and fences. It is not designed for the heavy foot traffic and wear that decking surfaces endure. For decking, you should use a product specifically made for that purpose.
For optimal protection and a rich, consistent colour, we generally recommend applying two coats. Allow 1 hour of drying time between coats.
No, you do not need to sand or prime the wood beforehand. Ronseal Fence Life Plus is designed to be an all-in-one treatment. Simply ensure the wood surface is clean, dry, and free from loose material before application.
Yes, once the paint is completely dry, it is safe for children and pets to be in contact with the treated surfaces. Always ensure the treated area has fully dried and ventilated before allowing access.
For best results and to ensure thorough coverage, brush application is recommended. The product description specifies brush application for colouring and protecting your sheds and fences.
Ronseal Fence Life Plus is designed to provide long-lasting protection against weather and UV damage. While exact lifespan can vary based on exposure to elements, regular inspection and reapplication as needed will maintain effectiveness. Info needed: [Typical lifespan is often 3-5 years for Fence Life Plus, but not specified in product data.]
Check ambient temperature and humidity; drying times can extend in cold or damp conditions. Ensure thin, even coats are applied rather than thick layers.
Ensure the paint was thoroughly stirred before and during application to distribute pigments evenly. Apply in consistent, overlapping strokes to avoid patchy areas. Two coats often help achieve a more uniform finish.
Verify the wood surface was clean, dry, and free from loose material before painting. Previous treatments or wood types can affect absorption; ensure sufficient paint is applied without overspreading.
The final colour can be influenced by the natural colour of the wood underneath and the number of coats applied. Always perform a small test patch in an inconspicuous area and allow it to dry fully before committing to the entire project.
