Upaintpvc Upvc Paint Black - Gloss 250Ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This UpaintPVC Black Gloss 250ml is designed for homeowners and DIY enthusiasts looking to refresh and repair existing uPVC and plastic surfaces. Its key benefit is providing a durable, high-quality gloss finish that restores faded or damaged items like windows, doors, and gutters with ease. A minor caveat is that the 250ml pot is best suited for touch-ups and smaller projects, not complete renovations of very large areas. This solvent-based paint offers UV and weather resistance, excellent color stability, and flexibility, making it ideal for recoloring, regenerating, and retouching worn uPVC, plastic, and plastisol.
All features
| Colour | Black |
|---|---|
| Model Part Number | UPVC/250 |
| Brand | upaintpvc |
Extended Product Information
FAQs
What surfaces can I use UpaintPVC Black Gloss on?
UpaintPVC is designed for uPVC, most plastics, and plastisol surfaces. It's ideal for windows, doors, frames, fascias, soffits, guttering, downpipes, and conservatories.
Is this paint suitable for outdoor use?
Yes, it is formulated to be UV and weather-resistant, making it suitable for exterior applications and maintaining colour stability.
How should I prepare the surface before painting?
The surface must be clean, dry, and free from grease. Lightly abrading the surface with fine-grit sandpaper and then cleaning it again will ensure the best adhesion.
Can I use this paint on metal or wood?
This paint is specifically formulated for uPVC and plastics. It is not recommended for use on metal or wood surfaces.
How long does it take to dry?
The paint is typically touch-dry within 1-2 hours, but recoating times may vary. Refer to the product packaging for specific drying times.
What is the best way to apply this paint?
It can be applied by brush or a small roller for precise coverage on smaller areas or touch-ups.
How do I clean my newly painted surface?
Once fully cured, clean gently with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive materials.
Troubleshooting
Paint is not adhering well.
Ensure the surface was properly cleaned and lightly abraded before application. Check for any residual contaminants like grease or silicone.
Uneven finish or brush marks visible.
Apply paint in thin, even coats. Use a good quality brush or small roller and maintain a wet edge. Avoid overworking the paint.
Paint is taking too long to dry.
Ensure application is done within the recommended temperature and humidity conditions. Avoid applying excessively thick coats.
Color appears different from expected.
Ensure the original surface color is not showing through significantly. Apply additional thin coats if necessary. Color perception can also be affected by lighting.
Pros and Cons
Pros
- Provides a durable, high-quality gloss finish.
- Excellent UV and weather resistance for longevity.
- Fast-drying formula speeds up application.
- Ideal for restoring and refreshing uPVC and plastic items.
- Good colour stability and flexibility prevent cracking and fading.
Cons
- 250ml size is best for touch-ups, not large areas.
- Solvent-based, requiring adequate ventilation during use.
- May require surface preparation for optimal adhesion.
Setup, Compatibility & Care
Preparation:
Ensure the surface is clean, dry, and free from any grease, dirt, or loose paint. For best results, lightly abrade the surface with fine-grit sandpaper and clean again to ensure optimal adhesion.
Application:
This paint is suitable for brush or small roller application. Apply thin, even coats. Allow adequate drying time between coats as per manufacturer instructions (typically 1-2 hours for touch dry, longer for recoating).
Compatibility:
Primarily designed for uPVC, plastic, and plastisol surfaces. Test on an inconspicuous area first if unsure about compatibility with specific materials.
Care:
Once dry, the painted surface can be cleaned gently with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the finish.