PlastiKote Twist & Spray Radiator - Satin White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The PlastiKote Twist & Spray Radiator paint is ideal for DIYers looking to refresh their heating units with a professional, smooth finish without the hassle of brushes or rollers. Its primary benefit is the specialized heat-resistant formula that prevents yellowing and leaves no brush marks, though users should ensure proper ventilation during application to manage the spray fumes effectively.
All features
| Colour | White |
|---|---|
| Model Part Number | 026102 |
| Brand | PlastiKote |
Extended Product Information
FAQs
Does this paint yellow over time?
No, the formula is specifically designed to be non-yellowing, even when exposed to radiator heat.
Do I need to prime the radiator first?
For best results, especially if the radiator is rusted or bare metal, a suitable metal primer is recommended before applying the top coat.
Can I use this on a hot radiator?
No, the radiator must be completely cool to the touch and turned off before you begin painting.
How many cans do I need?
Coverage depends on the size of your radiator, but generally, one can is sufficient for a standard single-panel radiator with two coats.
How long until the radiator can be turned back on?
Allow the paint to dry completely according to the instructions on the can (usually 24 hours) before turning the heat back on.
Is this paint available in other colors?
Yes, other variants such as Magnolia are available under the PlastiKote Twist & Spray line.
Troubleshooting
Spray nozzle clogging
Hold the can upside down and spray for 3-5 seconds to clear the valve.
Paint drips or runs
You are holding the can too close or moving too slowly; increase distance and use faster, sweeping motions.
Rough or grainy finish
Hold the can slightly closer to the surface and ensure you are spraying in a well-ventilated, low-dust environment.
Pros and Cons
Pros
- No brush marks for a smooth professional appearance
- Heat resistant up to 100° C
- Ergonomic design requires less finger pressure
- Easy-to-use locking mechanism
- Non-yellowing finish for long-term aesthetics
Cons
- Requires careful masking of surrounding walls
- Strong odor during application
- Requires good ventilation
Setup, Compatibility & Care
Before starting, clean the radiator surface thoroughly to remove dust, grease, and rust. Use masking tape and drop cloths to protect nearby walls, floors, and valves. Shake the can vigorously for at least one minute after the mixing ball rattles to ensure the paint consistency is correct. Always test the spray on a piece of scrap material first. To clean the nozzle after use, turn the can upside down and spray for a few seconds until clear propellant emerges. Store the can in a cool, dry place away from direct sunlight or extreme heat sources.