Evo-Stik Liquid Nails Grab Adhesive - White - V5730P
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Evo-Stik Liquid Nails Grab Adhesive, a versatile adhesive suitable for various materials. It offers a strong, weatherproof bond, ideal for demanding projects. Note that a cartridge gun is required for application and is not included with the product.
All features
| Colour | White |
|---|---|
| Model Part Number | V5730P |
| Brand | Evo-Stik |
Extended Product Information
FAQs
What materials can I use this adhesive on?
This adhesive works on wood, metal, brick, glass, plaster, plastics, and ceramics. Recommended for plastic lumber and engineered wood to real wood lumber only.
Does it work outside?
Yes, it is weatherproof and suitable for exterior use.
What is the coverage of one cartridge?
A C20 290ml cartridge covers approximately 14.5m using a 5mm bead.
Do I need any special tools?
Yes, you will need a cartridge gun to dispense and apply the adhesive; it is not included with the product.
How long does it take to cure?
Curing time depends on environmental conditions, but it typically forms a strong bond within 24-48 hours.
Can I paint over it?
Yes, once fully cured, it can be painted over.
How do I clean up the adhesive?
Use mineral spirits or a similar solvent to clean up the adhesive before it dries. Cured adhesive may need to be removed mechanically.
Troubleshooting
Adhesive not sticking properly.
Ensure surfaces are clean and dry. Make sure you are using the correct amount of adhesive and that you are using a cartridge gun to apply it.
Cartridge gun is not working properly.
Check the cartridge gun for any blockages or damage.
Adhesive takes too long to cure.
Ensure proper ventilation and check the temperature and humidity conditions. Low temperatures and high humidity can slow down curing.
Pros and Cons
Pros
- Strong, reliable bond.
- Suitable for a wide range of materials.
- Weatherproof, suitable for exterior use.
- Increases structural strength in engineered wood applications.
- Easy to use with a cartridge gun.
Cons
- Requires a cartridge gun for application (not included).
- Coverage is limited per cartridge.
- Not recommended for all materials. Only recommended for plastic lumber and engineered wood to real wood lumber.
- Beige and White colors are available, color selection might be limited.
Setup, Compatibility & Care
To use Evo-Stik Liquid Nails Grab Adhesive:
- Preparation: Ensure surfaces are clean, dry, and free from loose debris.
- Application: Load the cartridge into a suitable cartridge gun (not included). Apply the adhesive to one surface.
- Assembly: Immediately press the two surfaces together.
- Support: Provide temporary support if necessary until the adhesive cures.
Compatibility:
- Works with wood, metal, brick, glass, plaster, plastics, and ceramics.
- Specifically recommended for plastic lumber and engineered wood to real wood lumber only.
Care:
- Store in a cool, dry place.
- Avoid extreme temperatures.
- Clean up wet adhesive with a solvent like mineral spirits. Cured adhesive may need to be removed mechanically.