Amazfit T-Rex 3 Pro - 44mm - Black Gold

Firmware updates are managed through the Zepp App. Ensure your watch is connected to your phone and has sufficient battery. Open the Zepp App, go to your device's settings, and look for the 'Check for updates' option.

Yes, the T-Rex 3 Pro has 10 ATM water resistance and can be used for swimming and even diving up to 45 meters. It's recommended to rinse it with fresh water and dry it afterwards.

The two-color flashlight can be used for general illumination, low-interference signaling with red light, or for maximum visibility in Turbo Mode. It also features an SOS signal function for emergencies.

You can download offline maps for specific regions via the Zepp App. Once downloaded and transferred to the watch, you can use them for navigation, POI search, and route planning even without a phone connection.

The primary difference is the physical size of the watch case. The 44mm model is designed to be more compact, while the 48mm offers a larger presence. Both share the same core features and functionality.

Yes, you can reply to instant messages hands-free using Zepp Flow if you have an Android phone connected. For Bluetooth calls, you can answer and speak directly through the watch's built-in speaker and microphone.

In typical usage mode, the battery can last up to 17 days. In power-saving mode, it can last up to 24 days. With heavy usage, it's around 9 days. In full GPS mode, it lasts up to 29 hours.

Ensure the watch is charged. Connect it to the charger and wait a few minutes before attempting to power it on. Check that the charging contacts are clean and making proper contact.

Make sure you have a clear view of the sky. Avoid areas with tall buildings or dense foliage. Ensure GPS is enabled in the watch settings and the Zepp App. Try restarting the watch and phone.

Verify that Bluetooth is enabled on your phone and the watch is connected via the Zepp App. Check the notification settings within the Zepp App and ensure all necessary permissions are granted to the app on your phone.

Clean the screen with a soft, dry cloth. If the issue persists, try restarting the watch by holding down the power button.

Ensure NFC is enabled on the watch. Check that you have added at least one bank card in the Zepp Pay section of the Zepp App. Make sure the watch is within range of the payment terminal.