Rangemaster Nexus 90cm Dual Fuel Range Cooker - Slate

Currently unavailable

Currently unavailable
This guide is for owners of the Rangemaster Nexus 90cm Dual Fuel Range Cooker, providing essential information to maximize its functionality. You'll benefit from its versatile cooking capabilities and stylish design. However, note that proper installation and initial setup are crucial for optimal performance. This guide covers key features, practical use, setup instructions, and troubleshooting tips for your Rangemaster Nexus.
| Energy Efficiency | A |
|---|---|
| Colour | Grey |
| Model Part Number | NEX90DFFSL/C |
| Brand | Rangemaster |
Use a non-abrasive cleaner and a soft cloth to wipe the hob surface after each use. Remove the burner caps and pan supports to clean them separately. Avoid using abrasive pads that can scratch the surface.
Clean the oven after each use to prevent food buildup. The catalytic liners will help with this; however, you still need to wipe down any spills or splatters.
The flame failure device will cut off the gas supply. Turn off the burner, wait a few minutes, and then try to reignite it. If the problem persists, contact a qualified gas engineer.
This is a dual-fuel cooker. The hob uses gas, and the ovens are electric.
Please refer to the warranty information that came with your product. You may need to register your product to activate the warranty.
Follow the instructions in the user manual to set the timer. This typically involves using the buttons or controls on the display panel.
Yes, you can use the oven and grill at the same time, but be mindful of the heat generated.
Check the power supply to the oven, and ensure the temperature setting is correct. Check the fuse or circuit breaker. If the problem persists, contact a qualified technician.
Ensure the gas supply is turned on. Check that the burner caps are correctly positioned. Clean the burner ports with a pin or wire if blocked. If the electronic ignition is not working, check the power supply.
Replace the oven light bulb. Check the bulb type in the user manual and ensure it's compatible.
Consult the user manual to reset the timer. Make sure that the correct time is set. Check the battery if the timer is battery operated.