Stanley Quencher H2.O FlowState™ Tumbler - Purple Dust - 890 ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Stanley Quencher H2.O FlowState™ Tumbler in Purple Dust is designed for individuals seeking to maintain consistent hydration throughout their day with a large-capacity, durable, and stylish vessel. Its key benefit is exceptional temperature retention, keeping drinks cold for up to 9 hours or iced for up to 40 hours. A potential caveat is its substantial size, which may not fit all car cup holders.
All features
| Colour | Purple |
|---|---|
| Container Volume | 890 ml |
| Weight Grams | 635 g |
| Brand | Stanley |
Extended Product Information
FAQs
What is the capacity of the Stanley Quencher H2.O FlowState™ Tumbler?
The capacity of this specific tumbler is 890 ml.
How long does the insulation last?
It keeps drinks cold for up to 9 hours and iced for up to 40 hours due to its double-wall vacuum insulation.
Is the tumbler safe to put in the dishwasher?
Yes, the tumbler, lid, and straw are all top-rack dishwasher safe. However, hand washing is recommended for preserving the finish.
What materials is the tumbler made from?
It is made from recycled stainless steel with a powder coat finish and is BPA-free.
Does the tumbler fit in a standard car cup holder?
Yes, it features a narrow base designed to fit most standard car cup holders.
How do I ensure a splash-free experience?
Ensure the FlowState™ lid is securely fastened, and the reusable straw is properly inserted into the lid's opening.
What are the dimensions of the tumbler?
The dimensions are approximately 9.8 × 14.8 × 31.2 cm.
What is the weight of the tumbler?
The tumbler weighs approximately 635 grams.
Troubleshooting
Tumbler not keeping drinks cold as long as expected.
Ensure the lid is fully sealed and the straw is properly inserted. Check for any damage to the vacuum seal. Pre-chill the tumbler with ice water before filling for optimal performance.
Lid is difficult to remove or attach.
Ensure the tumbler is clean and dry. Sometimes, a slight twist while pulling can help. Avoid forcing the lid, as this can cause damage.
Straw is blocked or difficult to sip through.
Disassemble the lid and thoroughly clean the straw with a straw brush. Ensure no ice or debris is obstructing the flow.
Exterior condensation forming.
This can occur in very humid environments. Ensure the lid is tightly sealed. If condensation persists, it may indicate a compromised vacuum seal.
Powder coat finish chipping or scratching.
Avoid abrasive cleaning methods and placing the tumbler in situations where it may be scraped against hard surfaces. Hand washing and careful handling are recommended.
Pros and Cons
Pros
- Excellent temperature retention for cold and iced drinks.
- Large volume reduces refill frequency.
- Convenient carrying handle and cup holder friendly base.
- Durable construction with sustainable materials.
- Easy to clean as it is dishwasher safe.
- Splash-free design for on-the-go use.
Cons
- The 890 ml capacity may be too large for some users or car cup holders.
- The straw requires regular cleaning.
- Powder coat finish, while durable, can be scratched.
- Potential for condensation on the exterior if not perfectly sealed.
- Requires manual drying to maintain insulation integrity.
Setup, Compatibility & Care
Setup:
- Unpack your Stanley Quencher H2.O FlowState™ Tumbler.
- Before first use, wash the tumbler, lid, and straw with warm, soapy water.
- Ensure the lid is securely fastened to the tumbler for optimal insulation and spill prevention.
- Insert the reusable straw into the designated opening on the lid.
Compatibility:
- The narrow base is designed to fit most standard car cup holders.
- The FlowState™ lid is compatible with the 890 ml Quencher tumbler.
Care:
- Dishwasher Safe: The tumbler, lid, and straw are top-rack dishwasher safe for easy cleaning.
- Hand Wash Recommended: For longevity and to preserve the powder coat finish, hand washing with mild soap and water is recommended.
- Drying: Allow all parts to air dry completely or dry with a soft cloth. Do not use abrasive cleaners or scouring pads, as they can damage the finish.
- Storage: Store with the lid off to allow for complete air circulation and prevent odors.