HyperX Impact 32GB DDR4 2666Mhz SODIMM - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for laptop and small-form-factor PC users seeking to enhance system performance and reduce lag. The HyperX Impact HX426S16IB/32 delivers a significant boost through its 32GB DDR4 2666MHz capacity and Plug N Play automatic overclocking. A potential caveat is that automatic overclocking speeds may be limited by the system's BIOS on certain mobile processors.
All features
| Colour | Black |
|---|---|
| Series | Impact |
| Model Part Number | HX426S16IB/32 |
| Brand | Kingston |
Extended Product Information
FAQs
What is Plug N Play functionality?
Plug N Play (PnP) allows the HyperX Impact DDR4 module to automatically overclock itself to the highest frequency published and supported by the system's BIOS, without requiring manual BIOS configuration.
Can this memory module be used in a desktop computer?
No, this is a 260-pin SO-DIMM module, which is specifically designed for laptops and small-form-factor PCs. Desktop computers use larger DIMM modules.
Will this memory automatically run at 3200MHz?
The module is XMP-ready for speeds up to 3200MHz, but the Plug N Play functionality will automatically overclock to the highest frequency published by your system's manufacturer's BIOS. The rated speed for this specific module is 2666MHz.
What is the voltage for this HyperX Impact memory?
This HyperX Impact DDR4 memory operates at a low voltage of 1.2V, contributing to energy efficiency and cooler system operation.
Does this module support ECC (Error-Correcting Code)?
No, this specific HyperX Impact HX426S16IB/32 module does not support ECC. It is designed for standard laptop use where ECC is typically not required.
How do I know if my laptop is compatible?
Check your laptop's technical specifications or user manual for compatibility with DDR4 SO-DIMM memory modules and the maximum supported speed and capacity. This module is a 260-pin DDR4 SO-DIMM.
What is CAS Latency (CL) 16?
CAS Latency (CL) refers to the number of clock cycles it takes for the memory module to respond to a command. CL16 indicates a relatively fast response time for a DDR4 module at 2666 MHz.
Troubleshooting
System does not boot after installation
Ensure the module is correctly seated in the slot. Try reseating it. Verify compatibility with your system's specifications. If the issue persists, test with a known working module.
System recognizes less memory than installed
Confirm that your operating system and system BIOS support the total amount of RAM installed. Check that the module is fully seated. Some systems may have limitations on maximum supported RAM.
Instability or crashes during use
While Plug N Play is designed to be stable, some system configurations might encounter issues. Try disabling XMP in the BIOS if enabled, or manually setting the speed to 2666MHz if possible. Ensure your system's BIOS is up to date.
Performance is not as expected
Verify that the module is running at its rated speed (2666MHz) by checking system information tools. Ensure other system components are not bottlenecking performance. Check for software conflicts.
Pros and Cons
Pros
- Maximizes system memory for improved multitasking and application performance.
- Automatic overclocking simplifies performance upgrades.
- Low voltage operation enhances energy efficiency and thermal management.
- Designed for compatibility with Intel and AMD platforms.
- Sleek, low-profile design suitable for compact systems.
Cons
- Automatic overclocking speed is capped by the system's BIOS on some mobile CPUs.
- Single 32GB module may not be ideal for dual-channel configurations on systems that support it.
- Specific speed (2666MHz) might not be the highest available for all DDR4 systems.
- Not compatible with desktop PCs due to the SO-DIMM form factor.
Setup, Compatibility & Care
Setup:
- Power down your laptop or small-form-factor PC completely and unplug the power adapter.
- Open the access panel for the memory module (refer to your device's manual for specific instructions).
- Carefully remove the existing SO-DIMM module(s) if necessary, by gently pushing the retaining clips outward.
- Align the notch on the new HyperX Impact module with the notch in the slot.
- Insert the module at a 30-45 degree angle and then press it down until it clicks into place, secured by the clips.
- Close the access panel and reconnect the power adapter.
- Power on your system. The system should automatically detect the new memory.
Compatibility:
This module is a 260-pin DDR4 SO-DIMM and is designed for laptops and small-form-factor PCs. It supports Intel and AMD platforms. Ensure your motherboard's specifications are compatible with DDR4 2666 MHz memory. Note that Plug N Play overclocking may be limited by the system BIOS on certain mobile processors (e.g., up to 2133MHz for Skylake or 2400MHz for Kaby Lake mobile CPUs, excluding H-series Core i7 processors).
Care:
- Handle memory modules by the edges to avoid touching the gold contacts or chips.
- Store modules in an anti-static bag when not installed.
- Avoid exposing the module to extreme temperatures or moisture. Operating temperature is 0°C to 85°C.