Audio-Technica AT-LP120XBT USB Turntable - Black

Currently unavailable

Currently unavailable
The Audio-Technica AT-LP120XBT-USB is a versatile direct-drive turntable designed for both audiophiles and casual listeners, offering the convenience of Bluetooth connectivity alongside traditional analog and USB outputs. Its key benefit lies in its ability to deliver high-fidelity audio with the flexibility of wireless streaming and digital archiving. However, its manual operation may not suit those seeking a fully automated turntable experience.
| Colour | Black |
|---|---|
| Model Part Number | AT-LP120XBT-USB |
| Brand | Audio-Technica |
Connect the turntable to your computer using the included USB cable. Install recording software (like Audacity) to record and digitize your vinyl.
Yes, the turntable features Bluetooth, so you can pair it with Bluetooth-enabled speakers or headphones.
It comes with an AT-VM95E Dual Moving Magnet phono cartridge. The cartridge is compatible with any VM95 Series replacement stylus.
Use the counterweight at the back of the tonearm. Rotate the counterweight to balance the tonearm and then adjust to the recommended tracking force for your cartridge (refer to the manual).
The Audio-Technica AT-LP120XBT-USB Turntable typically comes with a one-year limited warranty.
Yes, the turntable supports 33 1/3, 45, and 78 RPM speeds.
Use a stylus brush, brushing gently from back to front.
Yes, it has a built-in, switchable phono pre-amplifier, so you can connect it to any amplifier or powered speaker.
Check that the power adapter is securely connected to both the turntable and a working outlet. Verify that the power switch on the turntable is turned on.
Ensure that the turntable is correctly connected to your amplifier or speakers. Check that the phono/line switch is set correctly. Check the volume levels on the amplifier and turntable.
Make sure Bluetooth is enabled on your receiving device and that it is within range. Try unpairing and re-pairing the devices. Reduce interference from other electronic devices.
Check the stylus condition and replace if worn. Adjust the tonearm tracking force and anti-skate settings according to the cartridge specifications. Clean the records.