Shopping.co.uk

ADATA LANCER BLADE RGB Memory Module 32GB (2 x 16GB) DDR5 - Black

Not AvailableADATA LANCER BLADE RGB Memory Module 32GB (2 x 16GB) DDR5 - Black

Sleek Efficiency. Compact Power. The LANCER BLADE RGB boasts a low-profile heatsink that fits perf...

Currently unavailable

Colour
BlackMulticolor

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Team Group DELTA RGB DDR5 6000 MHz RAM - 32 GBFrom £459View product Team Group DELTA RGB memory module 16 GB DDR4 3200 MHz - DELTA RGBFrom £146View product HPE memory module - 16 GB DDR3 - HPE 632202-001-RFBFrom £56View product HPE 16GB DDR4-2400 Memory Module - GreenFrom £118View product

Product Information

Full details

This guide is for PC builders and gamers seeking to upgrade their system's memory with the ADATA LANCER BLADE RGB DDR5 module. The key benefit is enhanced performance and visual customization with its high-speed DDR5 memory, ECC, and vibrant RGB lighting. However, users should be aware of potential compatibility issues depending on their motherboard. This guide covers setup, troubleshooting, and provides helpful tips for optimal use of your ADATA LANCER BLADE RGB DDR5 memory module.

All features

ColourBlack
SeriesLANCER BLADE
Model Part NumberAX5U6000C4816G-DTLABRBK
BrandADATA

Extended Product Information

FAQs

What is XMP and EXPO?

XMP (Intel Extreme Memory Profile) and EXPO (AMD Extended Profiles for Overclocking) are pre-defined profiles that allow you to easily overclock your memory to its rated speed with a single click in your BIOS. These profiles optimize the settings for your memory module.

How do I enable XMP/EXPO?

Enter your BIOS settings during startup (usually by pressing DEL, F2, or F12). Navigate to the memory or overclocking section and find the XMP or EXPO profile setting. Select the appropriate profile (usually Profile 1) and save the changes.

How do I control the RGB lighting?

You can control the RGB lighting using the XPG Prime software or through the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion). Make sure you close other lighting control software from different manufactures before using XPG Prime to avoid conflicts.

What is ECC and why is it important?

ECC (Error-Correcting Code) memory can detect and correct errors in real-time. This increases system stability and data integrity, which is especially important for servers and workstations, but also provides added reliability for gaming and general use.

What is the warranty period?

Please refer to the product packaging or ADATA's website for warranty information. The warranty typically covers manufacturing defects and failures.

Can I mix and match this memory module with other RAM?

While it's technically possible, it's generally not recommended. Mixing memory modules with different speeds, timings, or capacities can lead to instability and performance issues. For best results, use a matched set of memory modules.

What if the heatsink interferes with my CPU cooler?

The LANCER BLADE RGB is designed with a low-profile heatsink for compatibility. However, if there is interference, you may need to adjust the position of your CPU cooler or consider a different memory module.

Troubleshooting

Computer won't boot after installing memory.

Ensure the memory module is properly seated in the slot. Check your motherboard manual to confirm the correct slots are being used. Try resetting the CMOS and then try booting again. If the issue persists, test with only one memory module to isolate the problem.

System instability or crashes.

Ensure the memory is compatible with your motherboard and CPU. Check for BIOS updates. If overclocking, reduce the memory clock speed or voltage. Run a memory diagnostic test to check for errors.

RGB lighting not working.

Ensure the memory module is properly connected to the power supply, if applicable. Install and configure the appropriate RGB control software (e.g., XPG Prime or your motherboard's software). Check for conflicts with other RGB software.

Pros and Cons

Pros

  • Improved system performance with high-speed DDR5.
  • Enhanced stability and reliability due to ECC.
  • Customizable RGB lighting for visual appeal.
  • Easy overclocking with XMP 3.0 profiles.
  • Compatibility with both Intel and AMD platforms.

Cons

  • Potential compatibility issues depending on motherboard.
  • RGB software conflicts possible if not managed correctly.
  • Requires proper setup in BIOS for optimal performance.
  • Overclocking can void the warranty if done improperly.

Setup, Compatibility & Care

  1. Installation:
  • Turn off your computer and unplug the power cord.
  • Open your computer case and locate the memory slots on your motherboard. Consult your motherboard manual for the correct slots to use (usually slots 2 and 4 or the slots furthest away from the CPU).
  • Align the notch on the memory module with the notch in the memory slot and firmly press down on both ends until the clips click into place.
  • Close your computer case and connect the power cord.
  1. Compatibility:
  • Ensure your motherboard and CPU support DDR5 memory. Check the motherboard specifications for supported memory speeds and configurations.
  • Verify that your motherboard has the appropriate slots for the memory module (288-pin DIMM).
  • Update your motherboard's BIOS to the latest version for optimal compatibility and performance.
  1. Care:
  • Handle the memory module by the edges to avoid static discharge.
  • Keep the memory module clean and free of dust.
  • Avoid bending or damaging the module's PCB.
  • Ensure proper airflow within your computer case to prevent overheating.