Dyson V12 Detect Slim Cordless Vacuum - Yellow/Grey

Currently unavailable

Currently unavailable
The Dyson V12 Detect Slim Absolute is designed for homeowners seeking a powerful, lightweight, and intelligent cordless vacuum for deep cleaning. Its key benefit is the laser illumination that reveals hidden dust on hard floors and its adaptive suction power, but users should be aware of its smaller dustbin capacity compared to larger models.
| Colour | Yellow |
|---|---|
| Accent Colour | Grey |
| Series | V12 Detect Slim |
| Model Part Number | 405863-01/447625-01 |
| Brand | Dyson |
It offers up to 60 minutes of fade-free suction in eco mode. Run time can vary depending on the cleaning mode and tools used.
Simply slide the red lever forward to eject the dirt and dust directly into your bin. No need to touch the dirt.
Yes, the Dyson V12 Detect Slim Absolute comes with multiple cleaner heads. The Motorbar™ cleaner head is suitable for both carpets and hard floors, while the Laser Slim Fluffy™ cleaner head is optimized for hard floors.
Yes, it features whole-machine HEPA filtration which captures 99.99% of microscopic particles as small as 0.1 microns, expelling cleaner air.
The filter should be washed at least once a month or when the LCD screen indicates it needs cleaning. Ensure it is completely dry before reinserting, which can take at least 24 hours.
Yes, the V12 Detect Slim Absolute uses a click-in battery system. You can purchase an additional click-in battery to swap out and extend your cleaning time.
The LCD screen displays the current cleaning mode, remaining run time, and particle count analysis, providing scientific proof of your clean.
Check if the bin is full and empty it. Ensure the filter is clean and completely dry. Check all hoses and cleaner heads for blockages.
Ensure the battery is correctly clicked into the charger or wall dock. Check that the power outlet is working. Clean the battery contacts with a dry cloth.
Ensure the Laser Slim Fluffy™ cleaner head is correctly attached and the vacuum is turned on. Check for any debris obstructing the laser aperture.
Verify the cleaner head is properly connected. Check for any tangled debris preventing the brush bar from spinning. Ensure the vacuum is in the correct mode for the cleaner head.
Check if the battery is charged and properly inserted. If the battery is depleted, charge it fully. Ensure the trigger is fully depressed.
Setup:
Compatibility:
Care: