Rust-Oleum Furniture Paint - Teal

Currently unavailable

Currently unavailable
This Rust-Oleum Furniture Paint in Teal is designed for DIY enthusiasts and homeowners looking to refresh and update furniture. Its key benefit is providing a durable, elegant satin finish that enhances contemporary interiors. A minor caveat is that achieving the best results requires proper surface preparation. This paint offers a superior silk-touch satin finish in a soothing, elegant palette, carefully curated to complement modern decor, and is certified Toy Safe.
| Colour | Blue |
|---|---|
| Brand | Rust-Oleum |
This paint is primarily designed for interior furniture. For outdoor use, a paint specifically formulated for exterior conditions would be more appropriate.
The paint is typically dry to touch within 1-2 hours, but recoating is recommended after 2-4 hours. Full curing takes approximately 7 days, during which the finish will harden.
Yes, with proper preparation and sufficient coats, this paint can be used on kitchen cabinets. Ensure the surface is thoroughly cleaned and degreased before application.
A good quality synthetic brush is recommended for a smooth finish. A foam roller can also be used for larger flat surfaces.
Rust-Oleum offers Furniture Paint in a range of curated colours. The Teal variant is one option, and other shades are available.
Wipe spills promptly with a soft, damp cloth. Avoid using abrasive cleaners or scrubbing vigorously, especially before the paint has fully cured.
Ensure the surface was properly cleaned and prepared. Lightly sand glossy or slick surfaces before painting. Ensure adequate drying time between coats.
Stir paint thoroughly before application. Apply in thin, even coats, avoiding over-brushing. Use a high-quality brush or roller.
Ensure the paint has been stirred thoroughly. If necessary, thin slightly with water, but only if recommended on the product label for specific application methods.
Preparation: For best results, ensure the furniture surface is clean, dry, and free from dust, grease, and contaminants. Lightly sand glossy or previously painted surfaces to create a key for the paint to adhere to. Wipe away any dust after sanding.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Apply in thin, even coats. Avoid over-brushing. Two to three coats are typically recommended for full coverage. Allow at least 2-4 hours drying time between coats. Full cure takes approximately 7 days.
Compatibility: Suitable for use on wood, metal, laminate, and previously painted surfaces. Not recommended for direct application to bare MDF or plastics without appropriate priming.
Care: To clean, use a soft, damp cloth. Avoid abrasive cleaners or harsh scrubbing, as this can damage the finish. The paint is durable once fully cured, but gentle cleaning will preserve its appearance.