Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Ronseal Garden Paint in Cherry Blossom (750ml) is designed for homeowners and gardeners seeking to quickly add vibrant colour and protection to their outdoor spaces. Its key benefit is providing a durable finish on both wood and metal surfaces with a fast 1-hour dry time, though it is specifically formulated for exterior applications and not suitable for indoor use.
| Colour | Red |
|---|---|
| Model Part Number | 37606 |
| Brand | Ronseal |
This paint is suitable for exterior wood and exterior metal surfaces, such as fences, sheds, garden furniture, and metal gates.
The paint is touch dry in approximately 1 hour, allowing for quicker project completion.
On average, the paint covers up to 12m² per litre. Therefore, a 750ml can will cover approximately 9m² (0.75 litres * 12 m²/litre).
No, this Ronseal Garden Paint is specifically formulated for exterior use only.
Yes, for best results, ensure the surface is clean, dry, and free from any loose dirt, flaking paint, or rust. A light sanding of smooth surfaces can improve adhesion.
Clean your application tools immediately after use with warm, soapy water.
The paint provides a protective, coloured finish which helps to resist weathering and offers a degree of water resistance, protecting the underlying surface.
Yes, for a deeper colour and enhanced protection, two thin coats are recommended, allowing sufficient drying time between applications.
Check ambient temperature and humidity; paint may take longer to dry in cold or damp conditions. Ensure thin, even coats are applied.
Ensure the paint was thoroughly stirred before and during application. Apply an additional thin, even coat after the previous layer has fully dried.
Confirm the surface was clean and dry before painting. If painting over a dark colour, a second coat will likely be needed for full opacity. Ensure you're applying enough paint without over-applying.
This often indicates improper surface preparation. Ensure all loose material, dirt, and flaking paint were removed, and the surface was clean and dry before application.
