TIKKURILA Valtti Opaque Exterior Wood Paint - Paper F497
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The TIKKURILA Valtti Opaque Exterior Wood Paint is designed for homeowners and professionals seeking durable, long-lasting protection for exterior wood surfaces. Its key benefit is superior weather resistance and flexibility, reducing the need for frequent repainting. A potential caveat is that optimal performance and the full 15-year protection claim rely on using the recommended Tikkurila Ultra Primer system.
All features
| Colour | Beige |
|---|---|
| Model Part Number | F497 |
| Brand | Tikkurila |
Extended Product Information
FAQs
What surfaces can TIKKURILA Valtti Opaque be used on?
It is designed for exterior wood surfaces including timber cladding, wood facades, fences, doors, and sheds.
How long will the protection last?
When used as part of a full system with Tikkurila Ultra Primer, Valtti Opaque can protect exterior wood surfaces for up to 15 years.
Is this paint suitable for decking?
While it provides durable protection, it is not specifically recommended for surfaces in direct, prolonged contact with the ground or water. For decking, specific decking stains or treatments might be more suitable.
How do I clean the painted surface?
Clean tools with water immediately after use. For the painted surface, use a soft cloth or sponge with mild detergent and water. Avoid abrasive cleaners.
Can I tint this paint myself?
Valtti Opaque can be tinted to many colours. It is recommended to have it tinted at the point of purchase to ensure accuracy. Stir well after tinting and before application.
What is the drying time?
The paint is typically dry to the touch in 2-4 hours. Recoating can be done after the first coat is dry, again depending on ambient temperature and humidity.
Is this paint environmentally friendly?
It is a water-based, Low-VOC (Volatile Organic Compounds) formula, which means it has a lower odour and a better environmental profile compared to many solvent-rich alternatives.
Troubleshooting
Paint not adhering well
Ensure the surface was properly prepared, clean, dry, and free of contaminants. If applying to bare or weathered wood, ensure Tikkurila Ultra Primer was used as recommended.
Uneven finish or brush marks visible
Ensure the paint was stirred thoroughly and applied evenly with consistent brush strokes. Avoid overworking the paint. Apply in suitable environmental conditions (temperature and humidity).
Cracking or peeling after application
This may indicate insufficient surface preparation, application in poor conditions, or the absence of the recommended primer system on bare wood. Ensure flexibility of the wood was considered.
Colour appears different than expected
Ensure the paint was adequately stirred, especially if tinted. Colours can appear differently on various wood types and under different lighting conditions. Test in an inconspicuous area if unsure.
Pros and Cons
Pros
- Excellent protection against varied weather conditions.
- Flexible formula prevents cracking and peeling.
- Reduces long-term maintenance requirements.
- Breathable film helps preserve wood health.
- Environmentally conscious water-based, low-VOC formulation.
- Wide range of colour options available.
Cons
- Full 15-year protection requires using a specific primer system.
- Water-based formula may require specific application conditions.
- Tinting process may add to the initial cost.
- Drying times can vary based on ambient temperature and humidity.
- Semi-matt finish might not suit all aesthetic preferences.
Setup, Compatibility & Care Instructions
Preparation:
- Ensure the wood surface is clean, dry, and free from dirt, dust, grease, and loose paint.
- For bare or weathered wood, it is recommended to apply Tikkurila Ultra Primer first for optimal adhesion and protection.
- Treat any existing mould or algae with a suitable cleaner.
Application:
- Stir the paint thoroughly before and during application.
- Apply evenly using a brush or roller.
- Two coats are generally recommended for best results.
- Apply the second coat when the first coat is dry to the touch, typically after 2-4 hours depending on conditions.
Compatibility:
- Primarily designed for exterior wood surfaces including cladding, facades, fences, doors, and sheds.
- Not recommended for use on surfaces that will be in direct, prolonged contact with the ground or water.
- Always use as part of the recommended system with Tikkurila Ultra Primer for maximum longevity.
Care:
- Clean tools with water immediately after use.
- For cleaning the painted surface, use a soft cloth or sponge with mild detergent and water. Avoid abrasive cleaners.
- Regularly inspect the painted surface for any signs of damage or wear, and address them promptly.