Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to install the William Morris Pimpernel Wallpaper in the Blue Floral variant. It highlights the wallpaper's key features, installation process, and care instructions. The wallpaper offers a stunning visual appeal with its intricate floral design and ease of application, but users should be aware of the offset match and pattern repeat during installation for best results.
| Colour | Blue |
|---|---|
| Pattern | Floral |
| Model Part Number | 124241 |
| Brand | William Morris |
Use a wallpaper adhesive specifically designed for non-woven wallpapers, following the manufacturer's instructions for the best results.
Measure the height and width of your wall(s). Calculate the total square footage, and take into account the pattern repeat (41cm) to minimize waste. Consult a wallpaper calculator or professional for precise measurements.
While the wallpaper is spongeable, it is best suited for rooms with less moisture. Consider ventilation in bathrooms to prevent any issues.
You will need a measuring tape, level, pencil, wallpaper paste, pasting brush or roller, smoothing brush, sharp blade, straight edge, and a seam roller.
Since the wallpaper is fully strippable, lift a corner and gently pull it away from the wall. If it is difficult to remove, use a wallpaper scorer to perforate the surface, and then apply warm water to help loosen the adhesive.
Slight variations can occur. Ensure that the edges are butted together, and the pattern match is as close as possible. This is why having extra wallpaper is beneficial.
Use a smoothing brush to gently push the air bubbles towards the edges of the wallpaper. For persistent bubbles, carefully slice the bubble with a sharp blade and smooth it out.
Ensure the edges are tightly butted together during installation. Use a seam roller for a smooth finish. If seams are still visible, gently dab the edges with a matching color paint.
Ensure you have used the correct paste and applied it evenly to the wall. Check the adhesive manufacturer's instructions for the recommended drying time. Make sure the wall surface is clean and not overly absorbent.
